Casting Welder
Company
Chicago Magnesium Casting Co
Location
Blue Island, IL
Job Type
Full-time
Posted
1 day ago
Via
via LinkedIn
Job Description
This job was posted by https://illinoisjoblink.illinois.gov : For more
Information, Please See
https://illinoisjoblink.illinois.gov/jobs/13475093
• Basic Function:** Responsible for TIG welding magnesium and aluminum
sand castings
Physical Requirements
Maximum Lift Weight 50 lbs
Maximum Push/Pull Weight 100 lbs
\% Of Time Sitting 10%
\% Of Time Standing90%
Exposed to Severe Weather Conditions: Yes; Summer temps, furnace heat
Specific Responsibilities
• Accurate scanning in and out on jobs and the proper reporting of
processed quantities
• Wear proper safety equipment; keep work area clean and safe at all
times.
• Understand customer requirements, our companies internal scrap
challenges, rework, customer returns, the impact they have on your
job and demonstrate ability to deliver quality & efficient
workmanship.
• Review & inspect all material being used, building self-inspection
into everything you make/process
• Complete, date and sign-off on all routing information; apply weld
stamp where applicable; input required production Data/reporting
• Use weld equipment to repair defects and discontinuities in castings
• Identify weld area through part map (weld map); properly clean part
to remove contamination prior to welding
• Understand casting temper process; perform properly
• May machine and prepare castings for weld plugs & plug castings
• May machine excess stock from castings with milling machine
• May X-Ray castings (if Lev 1 X-Ray or higher certification) for weld
verification
• Perform job tasks in an efficient manner according to given
standards
• Maintain tools, gages, & equipment in clean orderly, safe &
functioning manner
• Offer ideas and suggestions for continuous improvement in supplies,
product, process, documentation
• Report any problems or discrepancies to immediate management
Skills
• Basic math skills
• Ability to read and understand all procedures required to perform
assigned tasks
• Communication skills
• Completion of Welding coursework/certification
Education/Training
On-the-Job training while working under an experienced operator until
position certification is achieved
Experience
1-2 years experience in TIG welding
Benefit information available on company website.
Information, Please See
https://illinoisjoblink.illinois.gov/jobs/13475093
• Basic Function:** Responsible for TIG welding magnesium and aluminum
sand castings
Physical Requirements
Maximum Lift Weight 50 lbs
Maximum Push/Pull Weight 100 lbs
\% Of Time Sitting 10%
\% Of Time Standing90%
Exposed to Severe Weather Conditions: Yes; Summer temps, furnace heat
Specific Responsibilities
• Accurate scanning in and out on jobs and the proper reporting of
processed quantities
• Wear proper safety equipment; keep work area clean and safe at all
times.
• Understand customer requirements, our companies internal scrap
challenges, rework, customer returns, the impact they have on your
job and demonstrate ability to deliver quality & efficient
workmanship.
• Review & inspect all material being used, building self-inspection
into everything you make/process
• Complete, date and sign-off on all routing information; apply weld
stamp where applicable; input required production Data/reporting
• Use weld equipment to repair defects and discontinuities in castings
• Identify weld area through part map (weld map); properly clean part
to remove contamination prior to welding
• Understand casting temper process; perform properly
• May machine and prepare castings for weld plugs & plug castings
• May machine excess stock from castings with milling machine
• May X-Ray castings (if Lev 1 X-Ray or higher certification) for weld
verification
• Perform job tasks in an efficient manner according to given
standards
• Maintain tools, gages, & equipment in clean orderly, safe &
functioning manner
• Offer ideas and suggestions for continuous improvement in supplies,
product, process, documentation
• Report any problems or discrepancies to immediate management
Skills
• Basic math skills
• Ability to read and understand all procedures required to perform
assigned tasks
• Communication skills
• Completion of Welding coursework/certification
Education/Training
On-the-Job training while working under an experienced operator until
position certification is achieved
Experience
1-2 years experience in TIG welding
Benefit information available on company website.
Frequently Asked Questions
Quick answers about Welder Jobs
What is the median hourly wage for welders in the United States as of January 2026 including overtime rates?
The Bureau of Labor Statistics reports the median hourly wage for welders at $28.45 as of January 2026 with time-and-a-half overtime required after 40 hours under FLSA rules. Welders in manufacturing earn an additional $4.20 per hour on average for night shifts. Annual median earnings reach $59,176 for full-time roles.
How many hours per week can welders legally work in the United States without overtime pay in 2026?
The U.S. Department of Labor sets the standard workweek at 40 hours with overtime at 1.5 times the regular rate required after that threshold in 2026. Welders on federal contracts receive double time for hours over 48 in a workweek. Paid sick leave of up to 56 hours annually applies under the Families First Coronavirus Response Act extensions.
What education and experience are required to qualify for welder jobs in the United States in 2026?
The Bureau of Labor Statistics states a high school diploma plus 6-12 months of postsecondary welding training or apprenticeship is required for 2026 entry-level positions. Three years of documented experience is mandatory for structural welding roles under AWS D1.1 standards referenced by DOL. Certification in SMAW or GMAW processes must be completed before hire.
What documents are required to apply for welder positions through U.S. Department of Labor registered apprenticeships in 2026?
Applicants must submit Form ETA-671, high school transcripts, and proof of U.S. work authorization to DOL-registered programs by March 2026 deadlines. A valid driver's license and negative drug test results from a SAMHSA-certified lab are mandatory. Background checks via FBI fingerprinting are required for nuclear or pipeline welding tracks.
