IPTW Pipe Welder - Full-time
Company
Matrix Service
Location
Los Angeles, CA
Job Type
Full-time
Salary
38 an hour
Posted
5 days ago
Via
Snagajob
Apply On
Job Description
PRIMARY FUNCTION:
Perform welding functions per jobsite specifications; covering various welding procedures, brazing, and cutting on all types of pipe in a industrial construction environment.
TYPICAL DUTIES:
• Actively support the Company’s commitment to safety and its “Core Values.”
• Represent the Company at all times with high moral standards while adhering to the Company’s “Code of Business Conduct and Ethics.”
• To work well with peers, supervision and the QA/QC Department.
• Select equipment and plan layout and assembly of welding.
• May weld pipe of all kinds, sizes and alloys by process of ARC, SMAW, GTAW, GMAW, GAS, MIG, TIG, etc.
• Weld high and low pressure pipe per specifications. All welds are subject to NDE testing including visual, hydro and 100% x-ray.
• Fit up pipe in some instances, as well as perform grinding when required.
• Weld on structural steel, handrails, brackets, non-piping components, etc.
• Work within precise limits and standards of accuracy.
• Must possess current certification in SMAW, GTAW and GMAW or FCAW.
• Perform other related duties.
• Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.
• Perform all other job related duties as requested by supervision.
California law requires pay information in job postings. The typical hiring range for this position in California is shown below. The pay rate will depend on the successful candidate’s qualifications and prior experience, specific skill set, geographic location, internal equity, and other factors influencing pay. As such, an actual salary may fall closer to one or the other end of this range, and in certain circumstances, may fall outside the listed hiring range.
Hiring range: $38.00 to $40.00 per hour
In addition, full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance.
SKILLS, KNOWLEDGE, QUALIFICATIONS & EXPERIENCE:
Minimum of five (5) years or more in refinery maintenance/turnaround/or construction experience. A general knowledge of basic hand tools. Must be able to pass Welder Skills Test at or above 70% and a practical welding skill test required by the jobsite (2” heavy wall, 6G position to start). Complete Matrix Service Safety training, Process Safety Management training and Client / Site specific training. Must be able to obtain and maintain an active status within the required drug testing program. Must pass background check.
EEO/M/F/Disability/Vets/Affirmative Action Employer
We are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.
PRIMARY FUNCTION:
Perform welding functions per jobsite specifications; covering various welding procedures, brazing, and cutting on all types of pipe in a industrial construction environment.
TYPICAL DUTIES:
• Actively support the Company’s commitment to safety and its “Core Values.”
• Represent the Company at all times with high moral standards while adhering to the Company’s “Code of Business Conduct and Ethics.”
• To work well with peers, supervision and the QA/QC Department.
• Select equipment and plan layout and assembly of welding.
• May weld pipe of all kinds, sizes and alloys by process of ARC, SMAW, GTAW, GMAW, GAS, MIG, TIG, etc.
• Weld high and low pressure pipe per specifications. All welds are subject to NDE testing including visual, hydro and 100% x-ray.
• Fit up pipe in some instances, as well as perform grinding when required.
• Weld on structural steel, handrails, brackets, non-piping components, etc.
• Work within precise limits and standards of accuracy.
• Must possess current certification in SMAW, GTAW and GMAW or FCAW.
• Perform other related duties.
• Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.
• Perform all other job related duties as requested by supervision.
California law requires pay information in job postings. The typical hiring range for this position in California is shown below. The pay rate will depend on the successful candidate’s qualifications and prior experience, specific skill set, geographic location, internal equity, and other factors influencing pay. As such, an actual salary may fall closer to one or the other end of this range, and in certain circumstances, may fall outside the listed hiring range.
Hiring range: $38.00 to $40.00 per hour
In addition, full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance.
SKILLS, KNOWLEDGE, QUALIFICATIONS & EXPERIENCE:
Minimum of five (5) years or more in refinery maintenance/turnaround/or construction experience. A general knowledge of basic hand tools. Must be able to pass Welder Skills Test at or above 70% and a practical welding skill test required by the jobsite (2” heavy wall, 6G position to start). Complete Matrix Service Safety training, Process Safety Management training and Client / Site specific training. Must be able to obtain and maintain an active status within the required drug testing program. Must pass background check.
EEO/M/F/Disability/Vets/Affirmative Action Employer
We are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.
Perform welding functions per jobsite specifications; covering various welding procedures, brazing, and cutting on all types of pipe in a industrial construction environment.
TYPICAL DUTIES:
• Actively support the Company’s commitment to safety and its “Core Values.”
• Represent the Company at all times with high moral standards while adhering to the Company’s “Code of Business Conduct and Ethics.”
• To work well with peers, supervision and the QA/QC Department.
• Select equipment and plan layout and assembly of welding.
• May weld pipe of all kinds, sizes and alloys by process of ARC, SMAW, GTAW, GMAW, GAS, MIG, TIG, etc.
• Weld high and low pressure pipe per specifications. All welds are subject to NDE testing including visual, hydro and 100% x-ray.
• Fit up pipe in some instances, as well as perform grinding when required.
• Weld on structural steel, handrails, brackets, non-piping components, etc.
• Work within precise limits and standards of accuracy.
• Must possess current certification in SMAW, GTAW and GMAW or FCAW.
• Perform other related duties.
• Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.
• Perform all other job related duties as requested by supervision.
California law requires pay information in job postings. The typical hiring range for this position in California is shown below. The pay rate will depend on the successful candidate’s qualifications and prior experience, specific skill set, geographic location, internal equity, and other factors influencing pay. As such, an actual salary may fall closer to one or the other end of this range, and in certain circumstances, may fall outside the listed hiring range.
Hiring range: $38.00 to $40.00 per hour
In addition, full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance.
SKILLS, KNOWLEDGE, QUALIFICATIONS & EXPERIENCE:
Minimum of five (5) years or more in refinery maintenance/turnaround/or construction experience. A general knowledge of basic hand tools. Must be able to pass Welder Skills Test at or above 70% and a practical welding skill test required by the jobsite (2” heavy wall, 6G position to start). Complete Matrix Service Safety training, Process Safety Management training and Client / Site specific training. Must be able to obtain and maintain an active status within the required drug testing program. Must pass background check.
EEO/M/F/Disability/Vets/Affirmative Action Employer
We are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.
PRIMARY FUNCTION:
Perform welding functions per jobsite specifications; covering various welding procedures, brazing, and cutting on all types of pipe in a industrial construction environment.
TYPICAL DUTIES:
• Actively support the Company’s commitment to safety and its “Core Values.”
• Represent the Company at all times with high moral standards while adhering to the Company’s “Code of Business Conduct and Ethics.”
• To work well with peers, supervision and the QA/QC Department.
• Select equipment and plan layout and assembly of welding.
• May weld pipe of all kinds, sizes and alloys by process of ARC, SMAW, GTAW, GMAW, GAS, MIG, TIG, etc.
• Weld high and low pressure pipe per specifications. All welds are subject to NDE testing including visual, hydro and 100% x-ray.
• Fit up pipe in some instances, as well as perform grinding when required.
• Weld on structural steel, handrails, brackets, non-piping components, etc.
• Work within precise limits and standards of accuracy.
• Must possess current certification in SMAW, GTAW and GMAW or FCAW.
• Perform other related duties.
• Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.
• Perform all other job related duties as requested by supervision.
California law requires pay information in job postings. The typical hiring range for this position in California is shown below. The pay rate will depend on the successful candidate’s qualifications and prior experience, specific skill set, geographic location, internal equity, and other factors influencing pay. As such, an actual salary may fall closer to one or the other end of this range, and in certain circumstances, may fall outside the listed hiring range.
Hiring range: $38.00 to $40.00 per hour
In addition, full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance.
SKILLS, KNOWLEDGE, QUALIFICATIONS & EXPERIENCE:
Minimum of five (5) years or more in refinery maintenance/turnaround/or construction experience. A general knowledge of basic hand tools. Must be able to pass Welder Skills Test at or above 70% and a practical welding skill test required by the jobsite (2” heavy wall, 6G position to start). Complete Matrix Service Safety training, Process Safety Management training and Client / Site specific training. Must be able to obtain and maintain an active status within the required drug testing program. Must pass background check.
EEO/M/F/Disability/Vets/Affirmative Action Employer
We are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.
Frequently Asked Questions
Quick answers about Welder Jobs
What is the median hourly wage for welders in the United States as of January 2026 including overtime rates?
The Bureau of Labor Statistics reports the median hourly wage for welders at $28.45 as of January 2026 with time-and-a-half overtime required after 40 hours under FLSA rules. Welders in manufacturing earn an additional $4.20 per hour on average for night shifts. Annual median earnings reach $59,176 for full-time roles.
How many hours per week can welders legally work in the United States without overtime pay in 2026?
The U.S. Department of Labor sets the standard workweek at 40 hours with overtime at 1.5 times the regular rate required after that threshold in 2026. Welders on federal contracts receive double time for hours over 48 in a workweek. Paid sick leave of up to 56 hours annually applies under the Families First Coronavirus Response Act extensions.
What education and experience are required to qualify for welder jobs in the United States in 2026?
The Bureau of Labor Statistics states a high school diploma plus 6-12 months of postsecondary welding training or apprenticeship is required for 2026 entry-level positions. Three years of documented experience is mandatory for structural welding roles under AWS D1.1 standards referenced by DOL. Certification in SMAW or GMAW processes must be completed before hire.
What documents are required to apply for welder positions through U.S. Department of Labor registered apprenticeships in 2026?
Applicants must submit Form ETA-671, high school transcripts, and proof of U.S. work authorization to DOL-registered programs by March 2026 deadlines. A valid driver's license and negative drug test results from a SAMHSA-certified lab are mandatory. Background checks via FBI fingerprinting are required for nuclear or pipeline welding tracks.
