Pipe Welders Needed
Company
Labor One Staffing
Location
Los Angeles, CA
Via
ZipRecruiter
Apply On
Job Description
Labor One is currently hiring Pipe Welders in San Diego, CA at a Shipyard.
$160 perdiem, if eligible.
Job Requirements:
Three years of experience in welding, knowledge of welding procedures, and various types of welding equipment, proficient in flat, vertical, overhead, and horizontal arc, SMAW and flux-core, tig welding and air arc skills.
Must comprehend written and verbal instructions (in English).
Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings.
Must pass a background check, vision test and drug test.
Must be able to work any shift and overtime.
Pipe Welding Assessment:
FCAW
Fillet weld plates:
· 2F 3F 4F (VT test)
• Fillet testing shall take 1-2 hours
Steel backing butt joint 6X6 3/8” thick:
· 2G 3G 4G (VT and UT test )
• All Butt joint testing takes a welder an average of 1-2 days
Butt joint with ceramic backing 12X8 ¾” thick:
· 1G 2G 3G (VT and UT test)
• All Butt joint testing takes a welder an average of 1-2 days
Simulation:
· Wraps 2F 3F 36” in length
· Diagonal 3F 4F 36” in length
· In and out corners 2F 4F 6”
· Water tight collar
· Air arc fillet welds
(VT testing)
• All simulation testing takes average welder 1-2 days
GTAW Pipe welding assessment
· 6G position - 2.5 “copper nickel pipe butt joint schedule 40 (VT and bent test)
· 5F, 4F position - 3” copper nickel pipe sleeve 200 (VT and macro etch test)
· 5F, 4Fposition - 1” mild steel pipe schedule socket weld 40 (VT and macro etch test)
• All pipe testing takes average welder 1-2 days
Send resume to [email protected]
$160 perdiem, if eligible.
Job Requirements:
Three years of experience in welding, knowledge of welding procedures, and various types of welding equipment, proficient in flat, vertical, overhead, and horizontal arc, SMAW and flux-core, tig welding and air arc skills.
Must comprehend written and verbal instructions (in English).
Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings.
Must pass a background check, vision test and drug test.
Must be able to work any shift and overtime.
Pipe Welding Assessment:
FCAW
Fillet weld plates:
· 2F 3F 4F (VT test)
• Fillet testing shall take 1-2 hours
Steel backing butt joint 6X6 3/8” thick:
· 2G 3G 4G (VT and UT test )
• All Butt joint testing takes a welder an average of 1-2 days
Butt joint with ceramic backing 12X8 ¾” thick:
· 1G 2G 3G (VT and UT test)
• All Butt joint testing takes a welder an average of 1-2 days
Simulation:
· Wraps 2F 3F 36” in length
· Diagonal 3F 4F 36” in length
· In and out corners 2F 4F 6”
· Water tight collar
· Air arc fillet welds
(VT testing)
• All simulation testing takes average welder 1-2 days
GTAW Pipe welding assessment
· 6G position - 2.5 “copper nickel pipe butt joint schedule 40 (VT and bent test)
· 5F, 4F position - 3” copper nickel pipe sleeve 200 (VT and macro etch test)
· 5F, 4Fposition - 1” mild steel pipe schedule socket weld 40 (VT and macro etch test)
• All pipe testing takes average welder 1-2 days
Send resume to [email protected]
Frequently Asked Questions
Quick answers about Restaurant Jobs
What is the federal minimum wage for restaurant servers in the United States in 2026?
As per the U.S. Department of Labor, the federal minimum wage for restaurant workers is $7.25 per hour as of January 1 2026. Tipped employees receive a cash wage of $2.13 per hour with tips required to reach the full $7.25 minimum. Overtime pay at 1.5 times the rate applies after 40 hours in a workweek.
How many hours can restaurant workers legally work per week without overtime in the United States in 2026?
As per the U.S. Department of Labor, non-exempt restaurant employees must receive overtime after 40 hours worked in a workweek during 2026. Employers must pay 1.5 times the regular rate for all hours over 40. Breaks of 30 minutes or more are not counted as working time if the employee is completely relieved of duties.
What work authorization documents are required for non-citizens applying to restaurant jobs in the United States in 2026?
As per U.S. Citizenship and Immigration Services, all new hires must complete Form I-9 by the end of their first day of work in 2026. Acceptable documents include a U.S. passport or green card combined with a driver's license. Employers must reverify work authorization before expiration of documents such as Employment Authorization Documents.
What tax withholding applies to restaurant tips in the United States in 2026?
As per the Internal Revenue Service, employers must withhold income tax, Social Security at 6.2 percent, and Medicare at 1.45 percent on all tips reported in 2026. Employees must report tips of $20 or more in a month to their employer by the 10th of the following month. Unreported tips are still subject to self-employment tax on Schedule SE.
