IPTW Pipe Welder - Full-time
Company
Matrix Service
Location
Los Angeles, CA
Job Type
Full-time
Salary
38 an hour
Posted
5 days ago
Via
Snagajob
Apply On
Job Description
PRIMARY FUNCTION:
Perform welding functions per jobsite specifications; covering various welding procedures, brazing, and cutting on all types of pipe in a industrial construction environment.
TYPICAL DUTIES:
• Actively support the Company’s commitment to safety and its “Core Values.”
• Represent the Company at all times with high moral standards while adhering to the Company’s “Code of Business Conduct and Ethics.”
• To work well with peers, supervision and the QA/QC Department.
• Select equipment and plan layout and assembly of welding.
• May weld pipe of all kinds, sizes and alloys by process of ARC, SMAW, GTAW, GMAW, GAS, MIG, TIG, etc.
• Weld high and low pressure pipe per specifications. All welds are subject to NDE testing including visual, hydro and 100% x-ray.
• Fit up pipe in some instances, as well as perform grinding when required.
• Weld on structural steel, handrails, brackets, non-piping components, etc.
• Work within precise limits and standards of accuracy.
• Must possess current certification in SMAW, GTAW and GMAW or FCAW.
• Perform other related duties.
• Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.
• Perform all other job related duties as requested by supervision.
California law requires pay information in job postings. The typical hiring range for this position in California is shown below. The pay rate will depend on the successful candidate’s qualifications and prior experience, specific skill set, geographic location, internal equity, and other factors influencing pay. As such, an actual salary may fall closer to one or the other end of this range, and in certain circumstances, may fall outside the listed hiring range.
Hiring range: $38.00 to $40.00 per hour
In addition, full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance.
SKILLS, KNOWLEDGE, QUALIFICATIONS & EXPERIENCE:
Minimum of five (5) years or more in refinery maintenance/turnaround/or construction experience. A general knowledge of basic hand tools. Must be able to pass Welder Skills Test at or above 70% and a practical welding skill test required by the jobsite (2” heavy wall, 6G position to start). Complete Matrix Service Safety training, Process Safety Management training and Client / Site specific training. Must be able to obtain and maintain an active status within the required drug testing program. Must pass background check.
EEO/M/F/Disability/Vets/Affirmative Action Employer
We are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.
PRIMARY FUNCTION:
Perform welding functions per jobsite specifications; covering various welding procedures, brazing, and cutting on all types of pipe in a industrial construction environment.
TYPICAL DUTIES:
• Actively support the Company’s commitment to safety and its “Core Values.”
• Represent the Company at all times with high moral standards while adhering to the Company’s “Code of Business Conduct and Ethics.”
• To work well with peers, supervision and the QA/QC Department.
• Select equipment and plan layout and assembly of welding.
• May weld pipe of all kinds, sizes and alloys by process of ARC, SMAW, GTAW, GMAW, GAS, MIG, TIG, etc.
• Weld high and low pressure pipe per specifications. All welds are subject to NDE testing including visual, hydro and 100% x-ray.
• Fit up pipe in some instances, as well as perform grinding when required.
• Weld on structural steel, handrails, brackets, non-piping components, etc.
• Work within precise limits and standards of accuracy.
• Must possess current certification in SMAW, GTAW and GMAW or FCAW.
• Perform other related duties.
• Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.
• Perform all other job related duties as requested by supervision.
California law requires pay information in job postings. The typical hiring range for this position in California is shown below. The pay rate will depend on the successful candidate’s qualifications and prior experience, specific skill set, geographic location, internal equity, and other factors influencing pay. As such, an actual salary may fall closer to one or the other end of this range, and in certain circumstances, may fall outside the listed hiring range.
Hiring range: $38.00 to $40.00 per hour
In addition, full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance.
SKILLS, KNOWLEDGE, QUALIFICATIONS & EXPERIENCE:
Minimum of five (5) years or more in refinery maintenance/turnaround/or construction experience. A general knowledge of basic hand tools. Must be able to pass Welder Skills Test at or above 70% and a practical welding skill test required by the jobsite (2” heavy wall, 6G position to start). Complete Matrix Service Safety training, Process Safety Management training and Client / Site specific training. Must be able to obtain and maintain an active status within the required drug testing program. Must pass background check.
EEO/M/F/Disability/Vets/Affirmative Action Employer
We are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.
Perform welding functions per jobsite specifications; covering various welding procedures, brazing, and cutting on all types of pipe in a industrial construction environment.
TYPICAL DUTIES:
• Actively support the Company’s commitment to safety and its “Core Values.”
• Represent the Company at all times with high moral standards while adhering to the Company’s “Code of Business Conduct and Ethics.”
• To work well with peers, supervision and the QA/QC Department.
• Select equipment and plan layout and assembly of welding.
• May weld pipe of all kinds, sizes and alloys by process of ARC, SMAW, GTAW, GMAW, GAS, MIG, TIG, etc.
• Weld high and low pressure pipe per specifications. All welds are subject to NDE testing including visual, hydro and 100% x-ray.
• Fit up pipe in some instances, as well as perform grinding when required.
• Weld on structural steel, handrails, brackets, non-piping components, etc.
• Work within precise limits and standards of accuracy.
• Must possess current certification in SMAW, GTAW and GMAW or FCAW.
• Perform other related duties.
• Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.
• Perform all other job related duties as requested by supervision.
California law requires pay information in job postings. The typical hiring range for this position in California is shown below. The pay rate will depend on the successful candidate’s qualifications and prior experience, specific skill set, geographic location, internal equity, and other factors influencing pay. As such, an actual salary may fall closer to one or the other end of this range, and in certain circumstances, may fall outside the listed hiring range.
Hiring range: $38.00 to $40.00 per hour
In addition, full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance.
SKILLS, KNOWLEDGE, QUALIFICATIONS & EXPERIENCE:
Minimum of five (5) years or more in refinery maintenance/turnaround/or construction experience. A general knowledge of basic hand tools. Must be able to pass Welder Skills Test at or above 70% and a practical welding skill test required by the jobsite (2” heavy wall, 6G position to start). Complete Matrix Service Safety training, Process Safety Management training and Client / Site specific training. Must be able to obtain and maintain an active status within the required drug testing program. Must pass background check.
EEO/M/F/Disability/Vets/Affirmative Action Employer
We are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.
PRIMARY FUNCTION:
Perform welding functions per jobsite specifications; covering various welding procedures, brazing, and cutting on all types of pipe in a industrial construction environment.
TYPICAL DUTIES:
• Actively support the Company’s commitment to safety and its “Core Values.”
• Represent the Company at all times with high moral standards while adhering to the Company’s “Code of Business Conduct and Ethics.”
• To work well with peers, supervision and the QA/QC Department.
• Select equipment and plan layout and assembly of welding.
• May weld pipe of all kinds, sizes and alloys by process of ARC, SMAW, GTAW, GMAW, GAS, MIG, TIG, etc.
• Weld high and low pressure pipe per specifications. All welds are subject to NDE testing including visual, hydro and 100% x-ray.
• Fit up pipe in some instances, as well as perform grinding when required.
• Weld on structural steel, handrails, brackets, non-piping components, etc.
• Work within precise limits and standards of accuracy.
• Must possess current certification in SMAW, GTAW and GMAW or FCAW.
• Perform other related duties.
• Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.
• Perform all other job related duties as requested by supervision.
California law requires pay information in job postings. The typical hiring range for this position in California is shown below. The pay rate will depend on the successful candidate’s qualifications and prior experience, specific skill set, geographic location, internal equity, and other factors influencing pay. As such, an actual salary may fall closer to one or the other end of this range, and in certain circumstances, may fall outside the listed hiring range.
Hiring range: $38.00 to $40.00 per hour
In addition, full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance.
SKILLS, KNOWLEDGE, QUALIFICATIONS & EXPERIENCE:
Minimum of five (5) years or more in refinery maintenance/turnaround/or construction experience. A general knowledge of basic hand tools. Must be able to pass Welder Skills Test at or above 70% and a practical welding skill test required by the jobsite (2” heavy wall, 6G position to start). Complete Matrix Service Safety training, Process Safety Management training and Client / Site specific training. Must be able to obtain and maintain an active status within the required drug testing program. Must pass background check.
EEO/M/F/Disability/Vets/Affirmative Action Employer
We are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.
Frequently Asked Questions
Quick answers about Restaurant Jobs
What is the federal minimum wage for restaurant servers in the United States in 2026?
As per the U.S. Department of Labor, the federal minimum wage for restaurant workers is $7.25 per hour as of January 1 2026. Tipped employees receive a cash wage of $2.13 per hour with tips required to reach the full $7.25 minimum. Overtime pay at 1.5 times the rate applies after 40 hours in a workweek.
How many hours can restaurant workers legally work per week without overtime in the United States in 2026?
As per the U.S. Department of Labor, non-exempt restaurant employees must receive overtime after 40 hours worked in a workweek during 2026. Employers must pay 1.5 times the regular rate for all hours over 40. Breaks of 30 minutes or more are not counted as working time if the employee is completely relieved of duties.
What work authorization documents are required for non-citizens applying to restaurant jobs in the United States in 2026?
As per U.S. Citizenship and Immigration Services, all new hires must complete Form I-9 by the end of their first day of work in 2026. Acceptable documents include a U.S. passport or green card combined with a driver's license. Employers must reverify work authorization before expiration of documents such as Employment Authorization Documents.
What tax withholding applies to restaurant tips in the United States in 2026?
As per the Internal Revenue Service, employers must withhold income tax, Social Security at 6.2 percent, and Medicare at 1.45 percent on all tips reported in 2026. Employees must report tips of $20 or more in a month to their employer by the 10th of the following month. Unreported tips are still subject to self-employment tax on Schedule SE.
