Aluminum Welder MIG / TIG Direct hire or Per Diem available
Company
NSC Technologies, LLC
Location
Los Angeles, CA
Via
6AM City Job Board
Apply On
Job Description
Job Description
Job Description
Aluminum MIG / TIG experience Direct hire or per diem available!
NSC Technologies is hiring Direct Hire Welders for immediate shipyard work in New Orleans, LA. We believe people should love what they do – in this role, you will be responsible for:
• Welding of aluminum materials in all positions. Must be able to work from standing, sitting, lying and kneeling positions. Some work must be accomplished with the use of mirror welding.
• Climbing on and over bulkheads, up and down ladders.
• Tack welding (kneeling, standing, sitting, lying, overhead burning of steel, dragging torch line)
• Use of jacks, porta-powers and come-a longs; some of which can weigh as much as 25 lbs.
• Lifting of material and tools (jacks, porta-powers, come-a longs, etc. Also loading and unloading of parts.
• Crawling through craft on top of tees and through manholes
• Bending and twisting of your body as needed to get into different compartments.
• Operation of cranes, forklifts
• Use of power tools (gougers, skill saws, cut saws, grinders). All require two hands on tools to operate in safe manner
• Walking on tops of frames and tees (uneven walking surfaces)
• Need to be able to work with your hands.
Qualifications
• 1-3 years of related experience.
• Demonstrated skills based on the results of the welding test.
• Note: Level will be determined based on relevant experience, scope of role, skills, etc
Education Requirements:
• High school diploma or GED certificate
For more information call or text Jessica - Recruiter 228-224-9984 or email [email protected]
Essential Physical Demand Requirements:
Physical demands described have been validated by on-site job analysis. They are representative of the physical demands that must be met by an employee to successfully and safely perform the essential functions of this job. The following information is a synopsis of key physical demand requirements determined from a detailed job analysis:
Postural: Must have the ability to move extremities and spine throughout a sufficient range of motion that will permit the employee to work in a variety of postures involving a range from floor to overhead level. Flexing and twisting of the trunk and other awkward postures are occasionally required.
Dexterity: Must have a good dexterity and frequently use one and two hands throughout the work period for hand tools and handling materials.
Cardiorespiratory Demand: Must have sufficient cardiorespiratory fitness to be able to perform medium work involving constant standing and walking, material handling and performing work in a hot, humid environment.
General Physical Activities: Include standing, walking, sitting, stooping, kneeling, squatting, body twisting, sense of touch, manual dexterity, speaking clearly, seeing distant/reading, reaching, hearing, depth perception, color vision, lifting, carrying, pushing, pulling, climbing ladders, climbing stairs and balancing.
Physical Demand Level - Medium: Must be able to perform medium physical labor as classified by the United States Department of Labor. May be required to lift up to 35 pounds for a single person lift, and up to 70 pounds team lift
Company DescriptionNSC is an innovative staffing firm that specializes in placing qualified skilled, technical and professional talent in virtually any market. Our meticulous dedication to Quality and Safety is a testament to our success. We are The Staffing Experts!
NSC Technologies is a drug free company. NSC is an EOE AA/M/F/VHo/D.
Company Description
NSC is an innovative staffing firm that specializes in placing qualified skilled, technical and professional talent in virtually any market. Our meticulous dedication to Quality and Safety is a testament to our success. We are The Staffing Experts!
NSC Technologies is a drug free company. NSC is an EOE AA/M/F/VHo/D.
Job Description
Aluminum MIG / TIG experience Direct hire or per diem available!
NSC Technologies is hiring Direct Hire Welders for immediate shipyard work in New Orleans, LA. We believe people should love what they do – in this role, you will be responsible for:
• Welding of aluminum materials in all positions. Must be able to work from standing, sitting, lying and kneeling positions. Some work must be accomplished with the use of mirror welding.
• Climbing on and over bulkheads, up and down ladders.
• Tack welding (kneeling, standing, sitting, lying, overhead burning of steel, dragging torch line)
• Use of jacks, porta-powers and come-a longs; some of which can weigh as much as 25 lbs.
• Lifting of material and tools (jacks, porta-powers, come-a longs, etc. Also loading and unloading of parts.
• Crawling through craft on top of tees and through manholes
• Bending and twisting of your body as needed to get into different compartments.
• Operation of cranes, forklifts
• Use of power tools (gougers, skill saws, cut saws, grinders). All require two hands on tools to operate in safe manner
• Walking on tops of frames and tees (uneven walking surfaces)
• Need to be able to work with your hands.
Qualifications
• 1-3 years of related experience.
• Demonstrated skills based on the results of the welding test.
• Note: Level will be determined based on relevant experience, scope of role, skills, etc
Education Requirements:
• High school diploma or GED certificate
For more information call or text Jessica - Recruiter 228-224-9984 or email [email protected]
Essential Physical Demand Requirements:
Physical demands described have been validated by on-site job analysis. They are representative of the physical demands that must be met by an employee to successfully and safely perform the essential functions of this job. The following information is a synopsis of key physical demand requirements determined from a detailed job analysis:
Postural: Must have the ability to move extremities and spine throughout a sufficient range of motion that will permit the employee to work in a variety of postures involving a range from floor to overhead level. Flexing and twisting of the trunk and other awkward postures are occasionally required.
Dexterity: Must have a good dexterity and frequently use one and two hands throughout the work period for hand tools and handling materials.
Cardiorespiratory Demand: Must have sufficient cardiorespiratory fitness to be able to perform medium work involving constant standing and walking, material handling and performing work in a hot, humid environment.
General Physical Activities: Include standing, walking, sitting, stooping, kneeling, squatting, body twisting, sense of touch, manual dexterity, speaking clearly, seeing distant/reading, reaching, hearing, depth perception, color vision, lifting, carrying, pushing, pulling, climbing ladders, climbing stairs and balancing.
Physical Demand Level - Medium: Must be able to perform medium physical labor as classified by the United States Department of Labor. May be required to lift up to 35 pounds for a single person lift, and up to 70 pounds team lift
Company DescriptionNSC is an innovative staffing firm that specializes in placing qualified skilled, technical and professional talent in virtually any market. Our meticulous dedication to Quality and Safety is a testament to our success. We are The Staffing Experts!
NSC Technologies is a drug free company. NSC is an EOE AA/M/F/VHo/D.
Company Description
NSC is an innovative staffing firm that specializes in placing qualified skilled, technical and professional talent in virtually any market. Our meticulous dedication to Quality and Safety is a testament to our success. We are The Staffing Experts!
NSC Technologies is a drug free company. NSC is an EOE AA/M/F/VHo/D.
Frequently Asked Questions
Quick answers about Plumber Jobs
What is the minimum hourly wage for plumbers in the United States as of 2026?
As per the U.S. Department of Labor, the federal minimum wage remains $7.25 per hour in 2026 but plumbers under Davis-Bacon prevailing wage determinations must receive at least $28.75 per hour on federal contracts. Overtime at 1.5 times the rate applies after 40 hours per week under the Fair Labor Standards Act.
How many years of apprenticeship are required to qualify as a licensed plumber in the United States in 2026?
As per the U.S. Department of Labor, registered plumbing apprenticeships require exactly 4 years or 8,000 hours of on-the-job training plus 576 hours of technical instruction completed by December 2026. A high school diploma or GED is mandatory for program entry.
What documents are needed to apply for a registered plumbing apprenticeship in the United States in 2026?
As per the U.S. Department of Labor, applicants must submit a valid driver's license, high school transcripts, and proof of age 18 or older by the application deadline of March 15, 2026. Background check clearance and drug screening results are also required before acceptance.
What are the standard working hours and paid leave entitlements for plumbers in the United States in 2026?
As per the U.S. Department of Labor, plumbers work 40 hours per week with overtime required after 40 hours and receive 10 paid federal holidays plus 12 days of annual leave after one year of service. Family and Medical Leave Act provides up to 12 weeks of unpaid leave for eligible employees.
