Pipe Welders Needed
Company
Labor One Staffing
Location
Los Angeles, CA
Via
ZipRecruiter
Apply On
Job Description
Labor One is currently hiring Pipe Welders in San Diego, CA at a Shipyard.
$160 perdiem, if eligible.
Job Requirements:
Three years of experience in welding, knowledge of welding procedures, and various types of welding equipment, proficient in flat, vertical, overhead, and horizontal arc, SMAW and flux-core, tig welding and air arc skills.
Must comprehend written and verbal instructions (in English).
Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings.
Must pass a background check, vision test and drug test.
Must be able to work any shift and overtime.
Pipe Welding Assessment:
FCAW
Fillet weld plates:
· 2F 3F 4F (VT test)
• Fillet testing shall take 1-2 hours
Steel backing butt joint 6X6 3/8” thick:
· 2G 3G 4G (VT and UT test )
• All Butt joint testing takes a welder an average of 1-2 days
Butt joint with ceramic backing 12X8 ¾” thick:
· 1G 2G 3G (VT and UT test)
• All Butt joint testing takes a welder an average of 1-2 days
Simulation:
· Wraps 2F 3F 36” in length
· Diagonal 3F 4F 36” in length
· In and out corners 2F 4F 6”
· Water tight collar
· Air arc fillet welds
(VT testing)
• All simulation testing takes average welder 1-2 days
GTAW Pipe welding assessment
· 6G position - 2.5 “copper nickel pipe butt joint schedule 40 (VT and bent test)
· 5F, 4F position - 3” copper nickel pipe sleeve 200 (VT and macro etch test)
· 5F, 4Fposition - 1” mild steel pipe schedule socket weld 40 (VT and macro etch test)
• All pipe testing takes average welder 1-2 days
Send resume to [email protected]
$160 perdiem, if eligible.
Job Requirements:
Three years of experience in welding, knowledge of welding procedures, and various types of welding equipment, proficient in flat, vertical, overhead, and horizontal arc, SMAW and flux-core, tig welding and air arc skills.
Must comprehend written and verbal instructions (in English).
Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings.
Must pass a background check, vision test and drug test.
Must be able to work any shift and overtime.
Pipe Welding Assessment:
FCAW
Fillet weld plates:
· 2F 3F 4F (VT test)
• Fillet testing shall take 1-2 hours
Steel backing butt joint 6X6 3/8” thick:
· 2G 3G 4G (VT and UT test )
• All Butt joint testing takes a welder an average of 1-2 days
Butt joint with ceramic backing 12X8 ¾” thick:
· 1G 2G 3G (VT and UT test)
• All Butt joint testing takes a welder an average of 1-2 days
Simulation:
· Wraps 2F 3F 36” in length
· Diagonal 3F 4F 36” in length
· In and out corners 2F 4F 6”
· Water tight collar
· Air arc fillet welds
(VT testing)
• All simulation testing takes average welder 1-2 days
GTAW Pipe welding assessment
· 6G position - 2.5 “copper nickel pipe butt joint schedule 40 (VT and bent test)
· 5F, 4F position - 3” copper nickel pipe sleeve 200 (VT and macro etch test)
· 5F, 4Fposition - 1” mild steel pipe schedule socket weld 40 (VT and macro etch test)
• All pipe testing takes average welder 1-2 days
Send resume to [email protected]
Frequently Asked Questions
Quick answers about Driver Jobs
What is the federal minimum wage for commercial truck drivers in the United States as of 2026?
As per the U.S. Department of Labor, the federal minimum wage for drivers in United States is $7.25 per hour as of January 2026. Drivers must receive overtime pay at 1.5 times the regular rate for all hours worked over 40 in a workweek under the Fair Labor Standards Act.
What work visa is required for non-US citizens to work as truck drivers in the United States in 2026?
As per USCIS, non-citizens need an employment-based visa such as H-2B for temporary non-agricultural work or EB-3 for permanent roles to work legally as drivers. Applications require a certified labor condition application and must be filed before the October 1, 2026 fiscal year start for H visas.
What experience and license are needed to qualify for entry-level driver jobs in the United States?
As per the U.S. Department of Labor, applicants need a valid commercial driver's license (CDL) Class A or B plus at least 1 year of verifiable driving experience within the last 3 years for most interstate roles. No formal education beyond a high school diploma is required for standard positions.
What documents are required to apply for driver positions through official US government channels in 2026?
As per the U.S. Department of Labor, applicants must submit a completed I-9 form, valid CDL, Social Security card, and driving record from the state DMV dated within 30 days. Background checks via FBI fingerprinting are mandatory for hazmat endorsements.
