IPTW Pipe Welder - Full-time
Company
Matrix Service
Location
Los Angeles, CA
Job Type
Full-time
Salary
38 an hour
Posted
5 days ago
Via
Snagajob
Apply On
Job Description
PRIMARY FUNCTION:
Perform welding functions per jobsite specifications; covering various welding procedures, brazing, and cutting on all types of pipe in a industrial construction environment.
TYPICAL DUTIES:
• Actively support the Company’s commitment to safety and its “Core Values.”
• Represent the Company at all times with high moral standards while adhering to the Company’s “Code of Business Conduct and Ethics.”
• To work well with peers, supervision and the QA/QC Department.
• Select equipment and plan layout and assembly of welding.
• May weld pipe of all kinds, sizes and alloys by process of ARC, SMAW, GTAW, GMAW, GAS, MIG, TIG, etc.
• Weld high and low pressure pipe per specifications. All welds are subject to NDE testing including visual, hydro and 100% x-ray.
• Fit up pipe in some instances, as well as perform grinding when required.
• Weld on structural steel, handrails, brackets, non-piping components, etc.
• Work within precise limits and standards of accuracy.
• Must possess current certification in SMAW, GTAW and GMAW or FCAW.
• Perform other related duties.
• Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.
• Perform all other job related duties as requested by supervision.
California law requires pay information in job postings. The typical hiring range for this position in California is shown below. The pay rate will depend on the successful candidate’s qualifications and prior experience, specific skill set, geographic location, internal equity, and other factors influencing pay. As such, an actual salary may fall closer to one or the other end of this range, and in certain circumstances, may fall outside the listed hiring range.
Hiring range: $38.00 to $40.00 per hour
In addition, full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance.
SKILLS, KNOWLEDGE, QUALIFICATIONS & EXPERIENCE:
Minimum of five (5) years or more in refinery maintenance/turnaround/or construction experience. A general knowledge of basic hand tools. Must be able to pass Welder Skills Test at or above 70% and a practical welding skill test required by the jobsite (2” heavy wall, 6G position to start). Complete Matrix Service Safety training, Process Safety Management training and Client / Site specific training. Must be able to obtain and maintain an active status within the required drug testing program. Must pass background check.
EEO/M/F/Disability/Vets/Affirmative Action Employer
We are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.
PRIMARY FUNCTION:
Perform welding functions per jobsite specifications; covering various welding procedures, brazing, and cutting on all types of pipe in a industrial construction environment.
TYPICAL DUTIES:
• Actively support the Company’s commitment to safety and its “Core Values.”
• Represent the Company at all times with high moral standards while adhering to the Company’s “Code of Business Conduct and Ethics.”
• To work well with peers, supervision and the QA/QC Department.
• Select equipment and plan layout and assembly of welding.
• May weld pipe of all kinds, sizes and alloys by process of ARC, SMAW, GTAW, GMAW, GAS, MIG, TIG, etc.
• Weld high and low pressure pipe per specifications. All welds are subject to NDE testing including visual, hydro and 100% x-ray.
• Fit up pipe in some instances, as well as perform grinding when required.
• Weld on structural steel, handrails, brackets, non-piping components, etc.
• Work within precise limits and standards of accuracy.
• Must possess current certification in SMAW, GTAW and GMAW or FCAW.
• Perform other related duties.
• Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.
• Perform all other job related duties as requested by supervision.
California law requires pay information in job postings. The typical hiring range for this position in California is shown below. The pay rate will depend on the successful candidate’s qualifications and prior experience, specific skill set, geographic location, internal equity, and other factors influencing pay. As such, an actual salary may fall closer to one or the other end of this range, and in certain circumstances, may fall outside the listed hiring range.
Hiring range: $38.00 to $40.00 per hour
In addition, full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance.
SKILLS, KNOWLEDGE, QUALIFICATIONS & EXPERIENCE:
Minimum of five (5) years or more in refinery maintenance/turnaround/or construction experience. A general knowledge of basic hand tools. Must be able to pass Welder Skills Test at or above 70% and a practical welding skill test required by the jobsite (2” heavy wall, 6G position to start). Complete Matrix Service Safety training, Process Safety Management training and Client / Site specific training. Must be able to obtain and maintain an active status within the required drug testing program. Must pass background check.
EEO/M/F/Disability/Vets/Affirmative Action Employer
We are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.
Perform welding functions per jobsite specifications; covering various welding procedures, brazing, and cutting on all types of pipe in a industrial construction environment.
TYPICAL DUTIES:
• Actively support the Company’s commitment to safety and its “Core Values.”
• Represent the Company at all times with high moral standards while adhering to the Company’s “Code of Business Conduct and Ethics.”
• To work well with peers, supervision and the QA/QC Department.
• Select equipment and plan layout and assembly of welding.
• May weld pipe of all kinds, sizes and alloys by process of ARC, SMAW, GTAW, GMAW, GAS, MIG, TIG, etc.
• Weld high and low pressure pipe per specifications. All welds are subject to NDE testing including visual, hydro and 100% x-ray.
• Fit up pipe in some instances, as well as perform grinding when required.
• Weld on structural steel, handrails, brackets, non-piping components, etc.
• Work within precise limits and standards of accuracy.
• Must possess current certification in SMAW, GTAW and GMAW or FCAW.
• Perform other related duties.
• Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.
• Perform all other job related duties as requested by supervision.
California law requires pay information in job postings. The typical hiring range for this position in California is shown below. The pay rate will depend on the successful candidate’s qualifications and prior experience, specific skill set, geographic location, internal equity, and other factors influencing pay. As such, an actual salary may fall closer to one or the other end of this range, and in certain circumstances, may fall outside the listed hiring range.
Hiring range: $38.00 to $40.00 per hour
In addition, full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance.
SKILLS, KNOWLEDGE, QUALIFICATIONS & EXPERIENCE:
Minimum of five (5) years or more in refinery maintenance/turnaround/or construction experience. A general knowledge of basic hand tools. Must be able to pass Welder Skills Test at or above 70% and a practical welding skill test required by the jobsite (2” heavy wall, 6G position to start). Complete Matrix Service Safety training, Process Safety Management training and Client / Site specific training. Must be able to obtain and maintain an active status within the required drug testing program. Must pass background check.
EEO/M/F/Disability/Vets/Affirmative Action Employer
We are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.
PRIMARY FUNCTION:
Perform welding functions per jobsite specifications; covering various welding procedures, brazing, and cutting on all types of pipe in a industrial construction environment.
TYPICAL DUTIES:
• Actively support the Company’s commitment to safety and its “Core Values.”
• Represent the Company at all times with high moral standards while adhering to the Company’s “Code of Business Conduct and Ethics.”
• To work well with peers, supervision and the QA/QC Department.
• Select equipment and plan layout and assembly of welding.
• May weld pipe of all kinds, sizes and alloys by process of ARC, SMAW, GTAW, GMAW, GAS, MIG, TIG, etc.
• Weld high and low pressure pipe per specifications. All welds are subject to NDE testing including visual, hydro and 100% x-ray.
• Fit up pipe in some instances, as well as perform grinding when required.
• Weld on structural steel, handrails, brackets, non-piping components, etc.
• Work within precise limits and standards of accuracy.
• Must possess current certification in SMAW, GTAW and GMAW or FCAW.
• Perform other related duties.
• Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.
• Perform all other job related duties as requested by supervision.
California law requires pay information in job postings. The typical hiring range for this position in California is shown below. The pay rate will depend on the successful candidate’s qualifications and prior experience, specific skill set, geographic location, internal equity, and other factors influencing pay. As such, an actual salary may fall closer to one or the other end of this range, and in certain circumstances, may fall outside the listed hiring range.
Hiring range: $38.00 to $40.00 per hour
In addition, full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance.
SKILLS, KNOWLEDGE, QUALIFICATIONS & EXPERIENCE:
Minimum of five (5) years or more in refinery maintenance/turnaround/or construction experience. A general knowledge of basic hand tools. Must be able to pass Welder Skills Test at or above 70% and a practical welding skill test required by the jobsite (2” heavy wall, 6G position to start). Complete Matrix Service Safety training, Process Safety Management training and Client / Site specific training. Must be able to obtain and maintain an active status within the required drug testing program. Must pass background check.
EEO/M/F/Disability/Vets/Affirmative Action Employer
We are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.
Frequently Asked Questions
Quick answers about Driver Jobs
What is the federal minimum wage for commercial truck drivers in the United States as of 2026?
As per the U.S. Department of Labor, the federal minimum wage for drivers in United States is $7.25 per hour as of January 2026. Drivers must receive overtime pay at 1.5 times the regular rate for all hours worked over 40 in a workweek under the Fair Labor Standards Act.
What work visa is required for non-US citizens to work as truck drivers in the United States in 2026?
As per USCIS, non-citizens need an employment-based visa such as H-2B for temporary non-agricultural work or EB-3 for permanent roles to work legally as drivers. Applications require a certified labor condition application and must be filed before the October 1, 2026 fiscal year start for H visas.
What experience and license are needed to qualify for entry-level driver jobs in the United States?
As per the U.S. Department of Labor, applicants need a valid commercial driver's license (CDL) Class A or B plus at least 1 year of verifiable driving experience within the last 3 years for most interstate roles. No formal education beyond a high school diploma is required for standard positions.
What documents are required to apply for driver positions through official US government channels in 2026?
As per the U.S. Department of Labor, applicants must submit a completed I-9 form, valid CDL, Social Security card, and driving record from the state DMV dated within 30 days. Background checks via FBI fingerprinting are mandatory for hazmat endorsements.
