Hotel Driver
Company
W Hotels
Location
Doha
Job Type
Full-time
Posted
16 days ago
Via
via BeBee
Apply On
Job Description
Additional Information
Job Number
26041890
Job Category
Rooms & Guest Services Operations
Location
W Doha, West Bay, Zone 61, Doha, Qatar, Qatar,VIEW ON MAP
Schedule
Full Time
Located Remotely?
N
Position Type
Non-Management
Position Summary Transport guests to/from assigned destinations using property vehicle. Document all trips prior to the start of and at the conclusion of each trip. Park vehicle in designated location when not in use.
Inspect property vehicles for damage and cleanliness. Check tire pressure and fluid levels for property vehicle, and refuel as necessary. Notify appropriate personnel of any vehicle maintenance needs. Document all vehicle incidents (i.e., damages, accidents) and provide reports of incidents to manager/supervisor.
Report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Follow all company policies and procedures; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Welcome and acknowledge all guests according to company standards; anticipate and address guests’ service needs; assist individuals with disabilities; thank guests with genuine appreciation.
Speak with others using clear and professional language; exchange information with other employees using electronic devices (e.g., pagers and two-way radios, email). Develop and maintain positive working relationships with others. Comply with quality assurance expectations and standards.
Read and visually verify information in a variety of formats (e.g., small print). Visually inspect tools, equipment, or machines (e.g., to identify defects). Move at a speed required to respond to work situations (e.g., run, walk, jog).
Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and objects weighing in excess of 75 pounds with assistance. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps.
Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Continual use of manual dexterity and gross motor skills with frequent use of bi-manual dexterity and fine motor skills. Perform other reasonable job duties as requested by Supervisors.
Preferred Qualification
Education: High school diploma or G.E.D. equivalent.
Related Work Experience: No related work experience.
Supervisory Experience: No supervisory experience.
Required Qualifications
License or Certification: Valid Driver’s License
At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates.
We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. W Hotels’ mission is to Ignite Curiosity, Expand Worlds. We are a place to experience life.
We’re here to open doors and open minds. We are constantly inspired by new faces and new experiences. A tuned-in, up-for-anything spirit is at our core and has made us renowned for reinventing the norms of luxury around the globe.
Whatever/Whenever is our culture and service philosophy that brings our guests’ passions to life. If you are original, innovative, and always looking towards the future of what’s possible, welcome to W Hotels. In joining W Hotels, you join a portfolio of brands with Marriott International.
Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.
Job Number
26041890
Job Category
Rooms & Guest Services Operations
Location
W Doha, West Bay, Zone 61, Doha, Qatar, Qatar,VIEW ON MAP
Schedule
Full Time
Located Remotely?
N
Position Type
Non-Management
Position Summary Transport guests to/from assigned destinations using property vehicle. Document all trips prior to the start of and at the conclusion of each trip. Park vehicle in designated location when not in use.
Inspect property vehicles for damage and cleanliness. Check tire pressure and fluid levels for property vehicle, and refuel as necessary. Notify appropriate personnel of any vehicle maintenance needs. Document all vehicle incidents (i.e., damages, accidents) and provide reports of incidents to manager/supervisor.
Report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Follow all company policies and procedures; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Welcome and acknowledge all guests according to company standards; anticipate and address guests’ service needs; assist individuals with disabilities; thank guests with genuine appreciation.
Speak with others using clear and professional language; exchange information with other employees using electronic devices (e.g., pagers and two-way radios, email). Develop and maintain positive working relationships with others. Comply with quality assurance expectations and standards.
Read and visually verify information in a variety of formats (e.g., small print). Visually inspect tools, equipment, or machines (e.g., to identify defects). Move at a speed required to respond to work situations (e.g., run, walk, jog).
Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and objects weighing in excess of 75 pounds with assistance. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps.
Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Continual use of manual dexterity and gross motor skills with frequent use of bi-manual dexterity and fine motor skills. Perform other reasonable job duties as requested by Supervisors.
Preferred Qualification
Education: High school diploma or G.E.D. equivalent.
Related Work Experience: No related work experience.
Supervisory Experience: No supervisory experience.
Required Qualifications
License or Certification: Valid Driver’s License
At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates.
We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. W Hotels’ mission is to Ignite Curiosity, Expand Worlds. We are a place to experience life.
We’re here to open doors and open minds. We are constantly inspired by new faces and new experiences. A tuned-in, up-for-anything spirit is at our core and has made us renowned for reinventing the norms of luxury around the globe.
Whatever/Whenever is our culture and service philosophy that brings our guests’ passions to life. If you are original, innovative, and always looking towards the future of what’s possible, welcome to W Hotels. In joining W Hotels, you join a portfolio of brands with Marriott International.
Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.
Frequently Asked Questions
Quick answers about Welder Jobs
What is the minimum wage for Welder Jobs in Qatar in 2026?
As per the Ministry of Labour, the minimum basic wage for welders in Qatar is 1,000 QAR per month as of 2026, with employers required to provide 500 QAR accommodation allowance or housing plus 300 QAR food allowance. Welders on 12-hour shifts receive 1.5 times the hourly rate for overtime beyond 8 hours daily. This applies to all private sector roles under Law No. 17 of 2020.
What work permit and visa requirements apply for foreign welders in Qatar?
Foreign welders must obtain a work permit sponsored by a Qatari employer through the Ministry of Labour before entry, with the visa issued under the Qatar ID system valid for 5 years renewable. As of 2026, applicants need a valid passport, medical fitness certificate from an approved center, and police clearance, with the employer handling the electronic application via the MOL portal within 30 days of arrival.
What education and experience are required for welder jobs in Qatar?
Welders must hold at least a secondary school certificate plus a recognized welding certification such as AWS or equivalent, with a minimum of 2 years documented experience in structural or pipeline welding. The Ministry of Labour requires submission of attested experience letters and trade test results for visa approval in 2026.
What documents are needed to apply for welder positions in Qatar?
Applications require a passport valid for 6 months, educational certificates attested by the Qatari embassy, experience letters, and a no-objection certificate from the current sponsor if changing jobs. The Ministry of Labour processes these via the online portal with approval typically within 7 working days as of 2026.
