CWB Welder - Morning Shift
Company
ICE Western Sales
Location
Calgary, AB
Job Type
Full-time
Posted
27 days ago
Via
via Techjobs.ca
Apply On
Job Description
**Welder / Fabricator**
Join Our Growing Team!
Since 1991, ICE Western Sales has been a leader in manufacturing highly complex **Custom HVAC units** for global commercial and industrial markets. Our commitment to service, safety, and innovation has driven us to where we are today—a rapidly growing organization with a **state-of-the-art manufacturing facility** spanning 5 acres in South Foothills Industrial Park, Calgary, Alberta.
• *Why Choose ICE Western**
- **Leading Technology** – Cutting-edge facility designed for innovation.
- **Global Reach** – Our HVAC products are trusted worldwide.
- **Innovation-Driven** – We set new standards in custom HVAC manufacturing.
- **Talented Team** – Over 100 dedicated professionals committed to excellence.
We are seeking experienced **Welders/Fabricators** to join our **morning shift team**. This position requires strong technical ability, attention to detail, and the ability to work in a fast-paced production environment.
• *Responsibilities:**
- Build skids/base frames and structural frames of all sizes.
- Perform **Fluxcore (FCAW)** welding (valid **CWB Flat Fluxcore ticket required**).
- Fit and weld according to **blueprint drawings**.
- Use equipment such as grinders, torches, chop saws, drill presses, and hand tools.
- Conduct stainless steel MIG wire welding for heat exchangers.
- Perform aluminum and stainless steel sheet metal welding.
- Participate in all **safety meetings** and follow company safety protocols.
- Maintain high-quality, consistent welds (primarily in flat position).
• *Requirements**
- Valid **CWB Flat Fluxcore ticket** (minimum).
- **Fitting experience** and blueprint reading ability.
- GMAW experience (asset).
- Must be registered or willing to register with the **Alberta Apprenticeship Board**.
- Red Seal Journeyman not required but an asset.
- Knowledge of raw materials, production, and QC inspection process.
- WHMIS and OSSA training (asset).
- Strong judgment, focus, and ability to work in a team environment.
• *Tools Required**
- Welding helmet
- 5" Grinder
- 1’ & 2’ squares / combination square
- Clamps (vice grip or bessey)
- Hammer & center punch
- Extension cord
- Die grinder (straight or 90°)
- Flashlight, wire cutters, chipping hammer
• *Afternoon Shift:**
- Morning Shift; Monday – Thursday, 6am – 3:30pm & Friday, 6am – 2:30pm
• *Compensation & Benefits**
- **Competitive Wages** – Based on experience and trade tickets.
- **Comprehensive Health, Dental & Vision Coverage**.
- **Paid Vacation** – Recharge and rest.
- **RRSP Matching Plan** – Build your financial future.
- **Educational Allowance** – Support for training and certifications.
- **Employee Assistance Program** – For work and life balance.
- **Free Parking & Company Events** – Team spirit from day one.
• *Wage:** Based on experience and trade tickets.
Join Our Growing Team!
Since 1991, ICE Western Sales has been a leader in manufacturing highly complex **Custom HVAC units** for global commercial and industrial markets. Our commitment to service, safety, and innovation has driven us to where we are today—a rapidly growing organization with a **state-of-the-art manufacturing facility** spanning 5 acres in South Foothills Industrial Park, Calgary, Alberta.
• *Why Choose ICE Western**
- **Leading Technology** – Cutting-edge facility designed for innovation.
- **Global Reach** – Our HVAC products are trusted worldwide.
- **Innovation-Driven** – We set new standards in custom HVAC manufacturing.
- **Talented Team** – Over 100 dedicated professionals committed to excellence.
We are seeking experienced **Welders/Fabricators** to join our **morning shift team**. This position requires strong technical ability, attention to detail, and the ability to work in a fast-paced production environment.
• *Responsibilities:**
- Build skids/base frames and structural frames of all sizes.
- Perform **Fluxcore (FCAW)** welding (valid **CWB Flat Fluxcore ticket required**).
- Fit and weld according to **blueprint drawings**.
- Use equipment such as grinders, torches, chop saws, drill presses, and hand tools.
- Conduct stainless steel MIG wire welding for heat exchangers.
- Perform aluminum and stainless steel sheet metal welding.
- Participate in all **safety meetings** and follow company safety protocols.
- Maintain high-quality, consistent welds (primarily in flat position).
• *Requirements**
- Valid **CWB Flat Fluxcore ticket** (minimum).
- **Fitting experience** and blueprint reading ability.
- GMAW experience (asset).
- Must be registered or willing to register with the **Alberta Apprenticeship Board**.
- Red Seal Journeyman not required but an asset.
- Knowledge of raw materials, production, and QC inspection process.
- WHMIS and OSSA training (asset).
- Strong judgment, focus, and ability to work in a team environment.
• *Tools Required**
- Welding helmet
- 5" Grinder
- 1’ & 2’ squares / combination square
- Clamps (vice grip or bessey)
- Hammer & center punch
- Extension cord
- Die grinder (straight or 90°)
- Flashlight, wire cutters, chipping hammer
• *Afternoon Shift:**
- Morning Shift; Monday – Thursday, 6am – 3:30pm & Friday, 6am – 2:30pm
• *Compensation & Benefits**
- **Competitive Wages** – Based on experience and trade tickets.
- **Comprehensive Health, Dental & Vision Coverage**.
- **Paid Vacation** – Recharge and rest.
- **RRSP Matching Plan** – Build your financial future.
- **Educational Allowance** – Support for training and certifications.
- **Employee Assistance Program** – For work and life balance.
- **Free Parking & Company Events** – Team spirit from day one.
• *Wage:** Based on experience and trade tickets.
Frequently Asked Questions
Quick answers about Welder Jobs
What is the minimum hourly wage for welders in Ontario as of January 2026?
As per the Ministry of Labour, Immigration, Training and Skills Development, the general minimum wage in Ontario is CAD 17.20 per hour as of January 1 2026 for welders in non-unionized roles. Welders classified under skilled trades receive overtime at 1.5 times the rate after 44 hours per week. This rate applies uniformly across all sectors without provincial variations for this occupation.
What work permit requirements apply for international welders moving to Canada in 2026?
Immigration, Refugees and Citizenship Canada requires a valid work permit under the Temporary Foreign Worker Program with an approved LMIA for NOC 72106 welders. Applicants need a minimum of two years paid experience in the last five years plus Red Seal endorsement. Processing takes 8 weeks for 80 percent of applications submitted after April 2026.
What education and certification are needed to qualify as a welder in Canada?
Employment and Social Development Canada lists completion of a 2-3 year apprenticeship or Red Seal certification as mandatory for NOC 72106 welder positions. Candidates must hold a high school diploma plus 6,000 hours of documented on-the-job training by December 2026. Provincial trade authorities issue the certificate of qualification after passing the Red Seal exam.
Which documents are required when applying for welder jobs through the federal skilled trades program?
Applicants must submit a valid passport, Red Seal certificate, language test results at CLB 5 or higher, and proof of funds equaling CAD 13,757 for a single applicant as of 2026. The Express Entry profile requires an Educational Credential Assessment for any foreign training completed before submission. All documents must be uploaded in PDF format under 5 MB each.
