Part Time Driver - (Port Elizabeth)
Company
Abby Health
Location
Gqeberha
Job Type
Part-time
Posted
2 days ago
Via
via BeBee
Job Description
Part Time Driver and Setup Assistant, Port Elizabeth (Gqeberha)
We are looking for a reliable part time driver to move our Abby Health Station between sites in and around Port Elizabeth. You will also help set it up and switch it on when you arrive.
Please read this first The Abby Health Station is 220cm tall, 55cm wide and 60cm deep, and weighs 46kg. It has wheels, so you can roll it, but it must travel lying flat inside a closed vehicle. It will not fit in a normal car boot.
You need one of these:
• A bakkie with a canopy
• A panel van
• A large SUV with all the rear seats folded flat
Please do not apply if your vehicle cannot take a 2.2m long item lying flat and out of sight.
What you will do
• Collect the station, load it safely and deliver it to the site
• Roll it into place, plug it in and check that it switches on
• Greet our client and be friendly and helpful while you are on site
• Collect it again at the end of the day and return it
• Let us know straight away about any delays, damage or problems
• Keep a simple record of each trip
What you need
• A valid driver's licence and at least 2 years of driving experience
• A clean driving record
• Your own vehicle that fits the description above, with valid insurance
• The ability to lift and move 46kg safely
• To be on time, every time
• Willingness to do a background check
Work and pay
• R700 per day to start
How to apply
Send us a short message telling us about your driving experience, along with a photo of the empty load space in your vehicle. Applications without a photo will not be considered.
More about us: www.go-abby.co.za
We are looking for a reliable part time driver to move our Abby Health Station between sites in and around Port Elizabeth. You will also help set it up and switch it on when you arrive.
Please read this first The Abby Health Station is 220cm tall, 55cm wide and 60cm deep, and weighs 46kg. It has wheels, so you can roll it, but it must travel lying flat inside a closed vehicle. It will not fit in a normal car boot.
You need one of these:
• A bakkie with a canopy
• A panel van
• A large SUV with all the rear seats folded flat
Please do not apply if your vehicle cannot take a 2.2m long item lying flat and out of sight.
What you will do
• Collect the station, load it safely and deliver it to the site
• Roll it into place, plug it in and check that it switches on
• Greet our client and be friendly and helpful while you are on site
• Collect it again at the end of the day and return it
• Let us know straight away about any delays, damage or problems
• Keep a simple record of each trip
What you need
• A valid driver's licence and at least 2 years of driving experience
• A clean driving record
• Your own vehicle that fits the description above, with valid insurance
• The ability to lift and move 46kg safely
• To be on time, every time
• Willingness to do a background check
Work and pay
• R700 per day to start
How to apply
Send us a short message telling us about your driving experience, along with a photo of the empty load space in your vehicle. Applications without a photo will not be considered.
More about us: www.go-abby.co.za
Frequently Asked Questions
Quick answers about Welder Jobs
What is the 2026 national minimum wage for welders in South Africa?
The Department of Employment and Labour sets the national minimum wage at R28.79 per hour from 1 March 2026 for all sectors including welding. Welders working more than 45 hours per week must receive 1.5 times this rate for overtime. Employers must display the wage schedule at every workplace.
Which trade certificate is required to legally work as a welder in South Africa in 2026?
Welders must hold a QCTO-registered occupational certificate in welding at NQF Level 4 obtained after completing a minimum 3-year apprenticeship and passing the trade test at an accredited centre. The certificate number must be verifiable on the QCTO database before any employer can hire the welder.
How many hours per week and days of annual leave apply to welder contracts in 2026?
Welders are limited to 45 ordinary hours per week and 8 hours per day under the Basic Conditions of Employment Act. They are entitled to 21 consecutive days of paid annual leave after every 12 months of employment, calculated from the date of engagement.
What documents must South African welders submit when applying for formal employment in 2026?
Applicants must provide a valid South African ID, QCTO trade certificate, valid bank account details, and proof of UIF registration number. Employers are required to verify the trade certificate directly with the QCTO before issuing an employment contract.
