Hiring Now: Qualified Plumber
Company
Recruite Agency
Location
Pretoria
Posted
2 days ago
Via
via Jooble
Job Description
We have an opening for a Qualified Plumber at a well-established plumbing firm in Pretoria, Gauteng. This position is suitable for a recently qualified plumber or one nearing the end of apprenticeship seeking further hands-on experience under senior guidance. A structured mentorship programme and registration support is provided.
Responsibilities
Team Supervision & Quality Control
• Supervise and guide junior plumbers and general assistants on site by allocating tasks clearly, demonstrating correct installation and repair techniques, monitoring workmanship against quality standards, and correcting errors before pipework is permanently concealed.
• Mentor plumbing apprentices by providing structured on-the-job training in pipefitting, fault diagnosis, reading technical drawings, professional customer communication, and safe work practices to support their preparation for trade testing with the relevant SETA.
• Conduct quality inspections of all plumbing installations before backfilling trenches or closing up walls and ceilings, checking pipe gradients, support spacing, joint integrity, and pressure test results to ensure each installation meets the required standard and is free of defects.
Maintenance & Technical Support
• Perform preventative maintenance inspections on plumbing infrastructure across commercial and industrial sites, checking for corrosion, joint integrity, water hammer, and pressure variations, and generating comprehensive condition reports with recommended remedial actions.
• Repair and replace hot water systems including electric and solar geysers, heat pumps, and circulating pumps, checking thermostat settings, heating elements, sacrificial anodes, and safety valves to restore reliable and energy-efficient hot water supply.
Requirements
• Proficiency in pipe cutting and threading, soldering, brazing, and use of push-fit and compression fittings.
• A recognised trade certificate in plumbing issued by a relevant SETA or a national certificate in plumbing.
• A minimum of three to four years of experience in plumbing installation, maintenance, or construction environments.
• A valid driver's licence is essential for roles requiring travel to multiple sites or call-out response.
• For drainage specialist roles, experience with high-pressure jetting equipment and CCTV drain inspection cameras.
• Physical fitness to work in confined spaces, at heights, and in environments that may be dirty or unpleasant.
Qualifications
Plumbing Industry Registration Board Registration
Responsibilities
Team Supervision & Quality Control
• Supervise and guide junior plumbers and general assistants on site by allocating tasks clearly, demonstrating correct installation and repair techniques, monitoring workmanship against quality standards, and correcting errors before pipework is permanently concealed.
• Mentor plumbing apprentices by providing structured on-the-job training in pipefitting, fault diagnosis, reading technical drawings, professional customer communication, and safe work practices to support their preparation for trade testing with the relevant SETA.
• Conduct quality inspections of all plumbing installations before backfilling trenches or closing up walls and ceilings, checking pipe gradients, support spacing, joint integrity, and pressure test results to ensure each installation meets the required standard and is free of defects.
Maintenance & Technical Support
• Perform preventative maintenance inspections on plumbing infrastructure across commercial and industrial sites, checking for corrosion, joint integrity, water hammer, and pressure variations, and generating comprehensive condition reports with recommended remedial actions.
• Repair and replace hot water systems including electric and solar geysers, heat pumps, and circulating pumps, checking thermostat settings, heating elements, sacrificial anodes, and safety valves to restore reliable and energy-efficient hot water supply.
Requirements
• Proficiency in pipe cutting and threading, soldering, brazing, and use of push-fit and compression fittings.
• A recognised trade certificate in plumbing issued by a relevant SETA or a national certificate in plumbing.
• A minimum of three to four years of experience in plumbing installation, maintenance, or construction environments.
• A valid driver's licence is essential for roles requiring travel to multiple sites or call-out response.
• For drainage specialist roles, experience with high-pressure jetting equipment and CCTV drain inspection cameras.
• Physical fitness to work in confined spaces, at heights, and in environments that may be dirty or unpleasant.
Qualifications
Plumbing Industry Registration Board Registration
Frequently Asked Questions
Quick answers about Welder Jobs
What is the 2026 national minimum wage for welders in South Africa?
The Department of Employment and Labour sets the national minimum wage at R28.79 per hour from 1 March 2026 for all sectors including welding. Welders working more than 45 hours per week must receive 1.5 times this rate for overtime. Employers must display the wage schedule at every workplace.
Which trade certificate is required to legally work as a welder in South Africa in 2026?
Welders must hold a QCTO-registered occupational certificate in welding at NQF Level 4 obtained after completing a minimum 3-year apprenticeship and passing the trade test at an accredited centre. The certificate number must be verifiable on the QCTO database before any employer can hire the welder.
How many hours per week and days of annual leave apply to welder contracts in 2026?
Welders are limited to 45 ordinary hours per week and 8 hours per day under the Basic Conditions of Employment Act. They are entitled to 21 consecutive days of paid annual leave after every 12 months of employment, calculated from the date of engagement.
What documents must South African welders submit when applying for formal employment in 2026?
Applicants must provide a valid South African ID, QCTO trade certificate, valid bank account details, and proof of UIF registration number. Employers are required to verify the trade certificate directly with the QCTO before issuing an employment contract.
