Urgent: Junior Plumber
Company
Recruite Agency
Location
Kariega
Job Type
Part-time
Posted
2 days ago
Via
via Jooble
Apply On
Job Description
We have an opening for a Junior Plumber at a well-established plumbing firm in Uitenhage, Eastern Cape. This position is suitable for a recently qualified plumber or one nearing the end of apprenticeship seeking further hands-on experience under senior guidance. A structured mentorship programme and registration support is provided.
Responsibilities
Team Supervision & Quality Control
• Supervise and guide junior plumbers and general assistants on site by allocating tasks clearly, demonstrating correct installation and repair techniques, monitoring workmanship against quality standards, and correcting errors before pipework is permanently concealed.
• Review completed job cards and site reports to verify that all work has been carried out to specification, materials used are correctly recorded, and the installation is ready for handover and client sign-off with a fully compliant Certificate of Compliance.
• Mentor plumbing apprentices by providing structured on-the-job training in pipefitting, fault diagnosis, reading technical drawings, professional customer communication, and safe work practices to support their preparation for trade testing with the relevant SETA.
• Conduct quality inspections of all plumbing installations before backfilling trenches or closing up walls and ceilings, checking pipe gradients, support spacing, joint integrity, and pressure test results to ensure each installation meets the required standard and is free of defects.
Installation & Site Execution
• Read and interpret plumbing drawings, isometric diagrams, specifications, and bills of quantities to determine pipe routes, fixture positions, material take-offs, and the correct sequence of installation activities before commencing any work on site.
• Install, connect, and commission water supply, drainage, sanitary fixtures, geysers, and hot water reticulation systems in accordance with SANS 10252 and SANS 10254 plumbing standards and approved building plans for residential and commercial projects.
• Set out and install below-ground drainage networks including sewer and stormwater pipes, inspection chambers, rodding eyes, and grease traps, ensuring correct falls and gradients are maintained to achieve self-cleansing flow velocities as required by building regulations.
Requirements
• Physical fitness to work in confined spaces, at heights, and in environments that may be dirty or unpleasant.
• For drainage specialist roles, experience with high-pressure jetting equipment and CCTV drain inspection cameras.
• Thorough knowledge of SANS plumbing codes and regulations governing water supply and drainage installations.
• A minimum of three to four years of experience in plumbing installation, maintenance, or construction environments.
• Proficiency in pipe cutting and threading, soldering, brazing, and use of push-fit and compression fittings.
Qualifications
Plumbing Industry Registration Board Registration
Responsibilities
Team Supervision & Quality Control
• Supervise and guide junior plumbers and general assistants on site by allocating tasks clearly, demonstrating correct installation and repair techniques, monitoring workmanship against quality standards, and correcting errors before pipework is permanently concealed.
• Review completed job cards and site reports to verify that all work has been carried out to specification, materials used are correctly recorded, and the installation is ready for handover and client sign-off with a fully compliant Certificate of Compliance.
• Mentor plumbing apprentices by providing structured on-the-job training in pipefitting, fault diagnosis, reading technical drawings, professional customer communication, and safe work practices to support their preparation for trade testing with the relevant SETA.
• Conduct quality inspections of all plumbing installations before backfilling trenches or closing up walls and ceilings, checking pipe gradients, support spacing, joint integrity, and pressure test results to ensure each installation meets the required standard and is free of defects.
Installation & Site Execution
• Read and interpret plumbing drawings, isometric diagrams, specifications, and bills of quantities to determine pipe routes, fixture positions, material take-offs, and the correct sequence of installation activities before commencing any work on site.
• Install, connect, and commission water supply, drainage, sanitary fixtures, geysers, and hot water reticulation systems in accordance with SANS 10252 and SANS 10254 plumbing standards and approved building plans for residential and commercial projects.
• Set out and install below-ground drainage networks including sewer and stormwater pipes, inspection chambers, rodding eyes, and grease traps, ensuring correct falls and gradients are maintained to achieve self-cleansing flow velocities as required by building regulations.
Requirements
• Physical fitness to work in confined spaces, at heights, and in environments that may be dirty or unpleasant.
• For drainage specialist roles, experience with high-pressure jetting equipment and CCTV drain inspection cameras.
• Thorough knowledge of SANS plumbing codes and regulations governing water supply and drainage installations.
• A minimum of three to four years of experience in plumbing installation, maintenance, or construction environments.
• Proficiency in pipe cutting and threading, soldering, brazing, and use of push-fit and compression fittings.
Qualifications
Plumbing Industry Registration Board Registration
Frequently Asked Questions
Quick answers about Welder Jobs
What is the 2026 national minimum wage for welders in South Africa?
The Department of Employment and Labour sets the national minimum wage at R28.79 per hour from 1 March 2026 for all sectors including welding. Welders working more than 45 hours per week must receive 1.5 times this rate for overtime. Employers must display the wage schedule at every workplace.
Which trade certificate is required to legally work as a welder in South Africa in 2026?
Welders must hold a QCTO-registered occupational certificate in welding at NQF Level 4 obtained after completing a minimum 3-year apprenticeship and passing the trade test at an accredited centre. The certificate number must be verifiable on the QCTO database before any employer can hire the welder.
How many hours per week and days of annual leave apply to welder contracts in 2026?
Welders are limited to 45 ordinary hours per week and 8 hours per day under the Basic Conditions of Employment Act. They are entitled to 21 consecutive days of paid annual leave after every 12 months of employment, calculated from the date of engagement.
What documents must South African welders submit when applying for formal employment in 2026?
Applicants must provide a valid South African ID, QCTO trade certificate, valid bank account details, and proof of UIF registration number. Employers are required to verify the trade certificate directly with the QCTO before issuing an employment contract.
