Structural Welder **$180/day per diem**
Company
Craft and Technical Solutions, LLC
Location
Houston, TX
Job Type
Full-time
Posted
1 day ago
Via
via Indeed
Apply On
Job Description
Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. Currently, CTS is reviewing resumes for Structural Welders in Mobile, AL.
• *$180/day per diem for qualified applicants**
• *60 hours per week**
Responsibilities:
• Complete fillet and butt welds GMAW-P process (multi-pass) in 2G, 3G, and 4G positions.
• Heat oxygen/propane heating torch.
• Perform grinding and pick up work as needed.
• Complete air carbon arc gouging.
• Properly use fillet and butt gauges.
• Must have a thorough knowledge of various metals characteristics and qualities including the correct welding processes required and the effects of welding on the material.
• Follow OSHA safety regulations.
• Maintain welding equipment and keep the work area clean and organized.
Requirements:
• Minimum 10 years of naval/commercial pulse welding experience.
• Successfully pass several tests over a three-week period.
• Must be able to speak, read, and understand English.
• Must have reliable transportation.
• Familiar with OSHA regulations relative to the shipbuilding industry.
• Pass a drug screen and background check.
• Comfortable with heights and in confined spaces.
• Lift 50lbs without assistance.
• Must understand the layout of the ship and compartment identification.
• Basic reading, writing and math skills required.
• Must be a US citizen.
CTS offers a comprehensive benefit packet to eligible employees. Eligible employees may enroll in:
• Health
• Dental
• Vision
• Voluntary Life/Voluntary AD&D
• Short-Term Disability
• Long-Term Disability
• Hospital Indemnity
• Accident
• Critical Illness
• 401k
Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success!
Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions.
Craft and Technical Solutions has a consistent policy that requires an online application to be completed before we can consider you as an applicant for this position.
CTS is an EOE AA M/F/Vet/Disability
IND6
Job Type: Full-time
Pay: $50.00 per hour
Work Location: In person
• *$180/day per diem for qualified applicants**
• *60 hours per week**
Responsibilities:
• Complete fillet and butt welds GMAW-P process (multi-pass) in 2G, 3G, and 4G positions.
• Heat oxygen/propane heating torch.
• Perform grinding and pick up work as needed.
• Complete air carbon arc gouging.
• Properly use fillet and butt gauges.
• Must have a thorough knowledge of various metals characteristics and qualities including the correct welding processes required and the effects of welding on the material.
• Follow OSHA safety regulations.
• Maintain welding equipment and keep the work area clean and organized.
Requirements:
• Minimum 10 years of naval/commercial pulse welding experience.
• Successfully pass several tests over a three-week period.
• Must be able to speak, read, and understand English.
• Must have reliable transportation.
• Familiar with OSHA regulations relative to the shipbuilding industry.
• Pass a drug screen and background check.
• Comfortable with heights and in confined spaces.
• Lift 50lbs without assistance.
• Must understand the layout of the ship and compartment identification.
• Basic reading, writing and math skills required.
• Must be a US citizen.
CTS offers a comprehensive benefit packet to eligible employees. Eligible employees may enroll in:
• Health
• Dental
• Vision
• Voluntary Life/Voluntary AD&D
• Short-Term Disability
• Long-Term Disability
• Hospital Indemnity
• Accident
• Critical Illness
• 401k
Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success!
Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions.
Craft and Technical Solutions has a consistent policy that requires an online application to be completed before we can consider you as an applicant for this position.
CTS is an EOE AA M/F/Vet/Disability
IND6
Job Type: Full-time
Pay: $50.00 per hour
Work Location: In person
Frequently Asked Questions
Quick answers about Welder Jobs
What is the median hourly wage for welders in the United States as of January 2026 including overtime rates?
The Bureau of Labor Statistics reports the median hourly wage for welders at $28.45 as of January 2026 with time-and-a-half overtime required after 40 hours under FLSA rules. Welders in manufacturing earn an additional $4.20 per hour on average for night shifts. Annual median earnings reach $59,176 for full-time roles.
How many hours per week can welders legally work in the United States without overtime pay in 2026?
The U.S. Department of Labor sets the standard workweek at 40 hours with overtime at 1.5 times the regular rate required after that threshold in 2026. Welders on federal contracts receive double time for hours over 48 in a workweek. Paid sick leave of up to 56 hours annually applies under the Families First Coronavirus Response Act extensions.
What education and experience are required to qualify for welder jobs in the United States in 2026?
The Bureau of Labor Statistics states a high school diploma plus 6-12 months of postsecondary welding training or apprenticeship is required for 2026 entry-level positions. Three years of documented experience is mandatory for structural welding roles under AWS D1.1 standards referenced by DOL. Certification in SMAW or GMAW processes must be completed before hire.
What documents are required to apply for welder positions through U.S. Department of Labor registered apprenticeships in 2026?
Applicants must submit Form ETA-671, high school transcripts, and proof of U.S. work authorization to DOL-registered programs by March 2026 deadlines. A valid driver's license and negative drug test results from a SAMHSA-certified lab are mandatory. Background checks via FBI fingerprinting are required for nuclear or pipeline welding tracks.
