Aluminum Welder MIG / TIG Direct hire or Per Diem available
Company
NSC Technologies, LLC
Location
Los Angeles, CA
Via
6AM City Job Board
Apply On
Job Description
Job Description
Job Description
Aluminum MIG / TIG experience Direct hire or per diem available!
NSC Technologies is hiring Direct Hire Welders for immediate shipyard work in New Orleans, LA. We believe people should love what they do – in this role, you will be responsible for:
• Welding of aluminum materials in all positions. Must be able to work from standing, sitting, lying and kneeling positions. Some work must be accomplished with the use of mirror welding.
• Climbing on and over bulkheads, up and down ladders.
• Tack welding (kneeling, standing, sitting, lying, overhead burning of steel, dragging torch line)
• Use of jacks, porta-powers and come-a longs; some of which can weigh as much as 25 lbs.
• Lifting of material and tools (jacks, porta-powers, come-a longs, etc. Also loading and unloading of parts.
• Crawling through craft on top of tees and through manholes
• Bending and twisting of your body as needed to get into different compartments.
• Operation of cranes, forklifts
• Use of power tools (gougers, skill saws, cut saws, grinders). All require two hands on tools to operate in safe manner
• Walking on tops of frames and tees (uneven walking surfaces)
• Need to be able to work with your hands.
Qualifications
• 1-3 years of related experience.
• Demonstrated skills based on the results of the welding test.
• Note: Level will be determined based on relevant experience, scope of role, skills, etc
Education Requirements:
• High school diploma or GED certificate
For more information call or text Jessica - Recruiter 228-224-9984 or email [email protected]
Essential Physical Demand Requirements:
Physical demands described have been validated by on-site job analysis. They are representative of the physical demands that must be met by an employee to successfully and safely perform the essential functions of this job. The following information is a synopsis of key physical demand requirements determined from a detailed job analysis:
Postural: Must have the ability to move extremities and spine throughout a sufficient range of motion that will permit the employee to work in a variety of postures involving a range from floor to overhead level. Flexing and twisting of the trunk and other awkward postures are occasionally required.
Dexterity: Must have a good dexterity and frequently use one and two hands throughout the work period for hand tools and handling materials.
Cardiorespiratory Demand: Must have sufficient cardiorespiratory fitness to be able to perform medium work involving constant standing and walking, material handling and performing work in a hot, humid environment.
General Physical Activities: Include standing, walking, sitting, stooping, kneeling, squatting, body twisting, sense of touch, manual dexterity, speaking clearly, seeing distant/reading, reaching, hearing, depth perception, color vision, lifting, carrying, pushing, pulling, climbing ladders, climbing stairs and balancing.
Physical Demand Level - Medium: Must be able to perform medium physical labor as classified by the United States Department of Labor. May be required to lift up to 35 pounds for a single person lift, and up to 70 pounds team lift
Company DescriptionNSC is an innovative staffing firm that specializes in placing qualified skilled, technical and professional talent in virtually any market. Our meticulous dedication to Quality and Safety is a testament to our success. We are The Staffing Experts!
NSC Technologies is a drug free company. NSC is an EOE AA/M/F/VHo/D.
Company Description
NSC is an innovative staffing firm that specializes in placing qualified skilled, technical and professional talent in virtually any market. Our meticulous dedication to Quality and Safety is a testament to our success. We are The Staffing Experts!
NSC Technologies is a drug free company. NSC is an EOE AA/M/F/VHo/D.
Job Description
Aluminum MIG / TIG experience Direct hire or per diem available!
NSC Technologies is hiring Direct Hire Welders for immediate shipyard work in New Orleans, LA. We believe people should love what they do – in this role, you will be responsible for:
• Welding of aluminum materials in all positions. Must be able to work from standing, sitting, lying and kneeling positions. Some work must be accomplished with the use of mirror welding.
• Climbing on and over bulkheads, up and down ladders.
• Tack welding (kneeling, standing, sitting, lying, overhead burning of steel, dragging torch line)
• Use of jacks, porta-powers and come-a longs; some of which can weigh as much as 25 lbs.
• Lifting of material and tools (jacks, porta-powers, come-a longs, etc. Also loading and unloading of parts.
• Crawling through craft on top of tees and through manholes
• Bending and twisting of your body as needed to get into different compartments.
• Operation of cranes, forklifts
• Use of power tools (gougers, skill saws, cut saws, grinders). All require two hands on tools to operate in safe manner
• Walking on tops of frames and tees (uneven walking surfaces)
• Need to be able to work with your hands.
Qualifications
• 1-3 years of related experience.
• Demonstrated skills based on the results of the welding test.
• Note: Level will be determined based on relevant experience, scope of role, skills, etc
Education Requirements:
• High school diploma or GED certificate
For more information call or text Jessica - Recruiter 228-224-9984 or email [email protected]
Essential Physical Demand Requirements:
Physical demands described have been validated by on-site job analysis. They are representative of the physical demands that must be met by an employee to successfully and safely perform the essential functions of this job. The following information is a synopsis of key physical demand requirements determined from a detailed job analysis:
Postural: Must have the ability to move extremities and spine throughout a sufficient range of motion that will permit the employee to work in a variety of postures involving a range from floor to overhead level. Flexing and twisting of the trunk and other awkward postures are occasionally required.
Dexterity: Must have a good dexterity and frequently use one and two hands throughout the work period for hand tools and handling materials.
Cardiorespiratory Demand: Must have sufficient cardiorespiratory fitness to be able to perform medium work involving constant standing and walking, material handling and performing work in a hot, humid environment.
General Physical Activities: Include standing, walking, sitting, stooping, kneeling, squatting, body twisting, sense of touch, manual dexterity, speaking clearly, seeing distant/reading, reaching, hearing, depth perception, color vision, lifting, carrying, pushing, pulling, climbing ladders, climbing stairs and balancing.
Physical Demand Level - Medium: Must be able to perform medium physical labor as classified by the United States Department of Labor. May be required to lift up to 35 pounds for a single person lift, and up to 70 pounds team lift
Company DescriptionNSC is an innovative staffing firm that specializes in placing qualified skilled, technical and professional talent in virtually any market. Our meticulous dedication to Quality and Safety is a testament to our success. We are The Staffing Experts!
NSC Technologies is a drug free company. NSC is an EOE AA/M/F/VHo/D.
Company Description
NSC is an innovative staffing firm that specializes in placing qualified skilled, technical and professional talent in virtually any market. Our meticulous dedication to Quality and Safety is a testament to our success. We are The Staffing Experts!
NSC Technologies is a drug free company. NSC is an EOE AA/M/F/VHo/D.
Frequently Asked Questions
Quick answers about Restaurant Jobs
What is the federal minimum wage for restaurant servers in the United States in 2026?
As per the U.S. Department of Labor, the federal minimum wage for restaurant workers is $7.25 per hour as of January 1 2026. Tipped employees receive a cash wage of $2.13 per hour with tips required to reach the full $7.25 minimum. Overtime pay at 1.5 times the rate applies after 40 hours in a workweek.
How many hours can restaurant workers legally work per week without overtime in the United States in 2026?
As per the U.S. Department of Labor, non-exempt restaurant employees must receive overtime after 40 hours worked in a workweek during 2026. Employers must pay 1.5 times the regular rate for all hours over 40. Breaks of 30 minutes or more are not counted as working time if the employee is completely relieved of duties.
What work authorization documents are required for non-citizens applying to restaurant jobs in the United States in 2026?
As per U.S. Citizenship and Immigration Services, all new hires must complete Form I-9 by the end of their first day of work in 2026. Acceptable documents include a U.S. passport or green card combined with a driver's license. Employers must reverify work authorization before expiration of documents such as Employment Authorization Documents.
What tax withholding applies to restaurant tips in the United States in 2026?
As per the Internal Revenue Service, employers must withhold income tax, Social Security at 6.2 percent, and Medicare at 1.45 percent on all tips reported in 2026. Employees must report tips of $20 or more in a month to their employer by the 10th of the following month. Unreported tips are still subject to self-employment tax on Schedule SE.
