Welder
Company
Madre Integrated Engineering
Location
Doha
Job Type
Full-time
Posted
9 days ago
Via
via قطر - تنقيب
Apply On
Job Description
Job description
We are seeking a Welder who will be responsible for performing high-quality weld repair works on
crusher rotors and heavy rotating equipment using approved welding procedures.
Candidate must be skilled in GMAW and SMAW processes, multi-pass welding, all
welding positions, and heat control requirements to ensure structural integrity
and equipment reliability.
Responsibilities:
• Perform weld repair of crusher rotors and heavy rotating equipment components.
• Execute groove and fillet welds in all positions as per approved WPS.
• Carry out multi-pass welding using GMAW root and SMAW fill/cap methods.
• Maintain required preheat and interpass temperatures during welding.
• Inspect weld quality and coordinate with QA/QC for testing requirements.
• Ensure proper grinding, preparation, fit-up, and final finishing.
• Follow all workshop/site safety procedures and PPE requirements.
• Maintain welding tools, machines, and consumables in safe working condition.
Requirements
• Valid ASME Section IX Welding Qualification Test (WQT) mandatory.
• Qualified in GMAW + SMAW welding processes.
• Proven experience with:
• ER80S-Ni2 (1.6 mm) – GMAW
• E8018-C1 (3.2 mm) – SMAW
• Qualified for all positions (groove & fillet welding).
• Experience in multi-pass welding (GMAW root + SMAW fill/cap).
• Familiar with Preheat 120°C – 150°C and interpass temperature control.
• Minimum 5+ years of experience in heavy equipment / rotating equipment repair.
• Ability to read WPS, follow welding procedures, and maintain quality standards.
We are seeking a Welder who will be responsible for performing high-quality weld repair works on
crusher rotors and heavy rotating equipment using approved welding procedures.
Candidate must be skilled in GMAW and SMAW processes, multi-pass welding, all
welding positions, and heat control requirements to ensure structural integrity
and equipment reliability.
Responsibilities:
• Perform weld repair of crusher rotors and heavy rotating equipment components.
• Execute groove and fillet welds in all positions as per approved WPS.
• Carry out multi-pass welding using GMAW root and SMAW fill/cap methods.
• Maintain required preheat and interpass temperatures during welding.
• Inspect weld quality and coordinate with QA/QC for testing requirements.
• Ensure proper grinding, preparation, fit-up, and final finishing.
• Follow all workshop/site safety procedures and PPE requirements.
• Maintain welding tools, machines, and consumables in safe working condition.
Requirements
• Valid ASME Section IX Welding Qualification Test (WQT) mandatory.
• Qualified in GMAW + SMAW welding processes.
• Proven experience with:
• ER80S-Ni2 (1.6 mm) – GMAW
• E8018-C1 (3.2 mm) – SMAW
• Qualified for all positions (groove & fillet welding).
• Experience in multi-pass welding (GMAW root + SMAW fill/cap).
• Familiar with Preheat 120°C – 150°C and interpass temperature control.
• Minimum 5+ years of experience in heavy equipment / rotating equipment repair.
• Ability to read WPS, follow welding procedures, and maintain quality standards.
Frequently Asked Questions
Quick answers about Driver Jobs
What is the minimum wage for Driver Jobs in Qatar?
As per the Ministry of Labour, the minimum wage for drivers in Qatar is 1,000 QAR basic salary per month as of 2026, plus 300 QAR food allowance and 500 QAR accommodation allowance. Overtime after 8 hours daily must be paid at 1.25 times the basic hourly rate under the Wage Protection System. Employers deposit wages electronically by the 7th of each month.
What work permit and visa requirements apply for foreign drivers in Qatar in 2026?
As per the Ministry of Labour, foreign drivers require employer-sponsored work permits valid for up to 5 years, obtained through the Qatar ID system after medical and security clearance. The permit costs 200 QAR and must be renewed before expiry with a valid driving license from the home country converted via the Traffic Department. No self-sponsored visas are allowed for driver roles.
What experience and license are needed to qualify for driver jobs in Qatar?
As per the Ministry of Labour, applicants need at least 2 years of professional driving experience and a valid Qatar driving license issued after passing the theory and practical test at the Traffic Department. A clean record with no more than 6 demerit points is mandatory for commercial vehicle categories.
What documents are required to apply for a driver position in Qatar?
As per the Ministry of Labour, applications require a valid passport, attested educational certificates, medical fitness report from an approved center, and a Qatar driving license application receipt. Employers submit the contract via the online MOL portal within 30 days of arrival.
