Welder/Fitter
Company
Trion Technical Oilfield Services LLC
Location
Abu Dhabi
Job Type
Full-time
Posted
6 days ago
Via
Glassdoor
Apply On
Job Description
Welder / Fitter – Roles & Responsibilities
1. Drawing Interpretation
• Read and understand fabrication drawings, shop drawings, and instructions
• Identify dimensions, tolerances, and welding details
2. Marking & Fit-Up
• Perform marking, cutting, and edge preparation of materials
• Align and fit components (plates, pipes, structures) as per drawings
• Ensure proper gap, level, and alignment before welding
3. Welding Activities
• Carry out welding (ARC, MIG, TIG as required)
• Follow WPS (Welding Procedure Specification) when applicable
• Ensure strong, defect-free welds with proper penetration
4. Grinding & Finishing
• Perform grinding, chipping, and surface finishing
• Remove slag, spatter, and sharp edges
5. Inspection & Quality Control
• Check fit-up and welding quality against drawings/specifications
• Rectify defects such as misalignment, cracks, or incomplete welds
6. Equipment Handling
• Operate welding machines, gas cutting sets, grinders, and hand tools
• Ensure proper handling and storage of electrodes and consumables
7. Maintenance of Tools
• Maintain tools and welding equipment in good working condition
• Report any faults or damages to supervisor
8. Safety Compliance
• Follow safety procedures and use PPE (helmet, gloves, goggles, etc.)
• Ensure safe handling of gas cylinders and electrical equipment
9. Site Work (if applicable)
• Assist in installation and erection at site
• Ensure proper alignment and fixing during installation
10. Team Coordination
• Work closely with fabricators, supervisors, and engineers
• Report progress, issues, and material requirements
Job Type: Full-time
Pay: From AED1,500.00 per month
Work Location: In person
1. Drawing Interpretation
• Read and understand fabrication drawings, shop drawings, and instructions
• Identify dimensions, tolerances, and welding details
2. Marking & Fit-Up
• Perform marking, cutting, and edge preparation of materials
• Align and fit components (plates, pipes, structures) as per drawings
• Ensure proper gap, level, and alignment before welding
3. Welding Activities
• Carry out welding (ARC, MIG, TIG as required)
• Follow WPS (Welding Procedure Specification) when applicable
• Ensure strong, defect-free welds with proper penetration
4. Grinding & Finishing
• Perform grinding, chipping, and surface finishing
• Remove slag, spatter, and sharp edges
5. Inspection & Quality Control
• Check fit-up and welding quality against drawings/specifications
• Rectify defects such as misalignment, cracks, or incomplete welds
6. Equipment Handling
• Operate welding machines, gas cutting sets, grinders, and hand tools
• Ensure proper handling and storage of electrodes and consumables
7. Maintenance of Tools
• Maintain tools and welding equipment in good working condition
• Report any faults or damages to supervisor
8. Safety Compliance
• Follow safety procedures and use PPE (helmet, gloves, goggles, etc.)
• Ensure safe handling of gas cylinders and electrical equipment
9. Site Work (if applicable)
• Assist in installation and erection at site
• Ensure proper alignment and fixing during installation
10. Team Coordination
• Work closely with fabricators, supervisors, and engineers
• Report progress, issues, and material requirements
Job Type: Full-time
Pay: From AED1,500.00 per month
Work Location: In person
Frequently Asked Questions
Quick answers about Cleaning Staff Jobs
What is the minimum monthly salary for cleaning staff jobs in the United Arab Emirates in 2026?
As per the Ministry of Human Resources and Emiratisation, the minimum salary for cleaning staff roles in the United Arab Emirates is AED 2,200 per month as of 1 January 2026, with overtime paid at 1.25 times the hourly rate for hours exceeding 8 per day. Employers must also provide accommodation or an additional AED 800 housing allowance. This applies to all private sector cleaning contracts registered under MOHRE.
What work permit and visa requirements apply to foreign cleaning staff in the United Arab Emirates for 2026?
As per the Ministry of Human Resources and Emiratisation, foreign cleaning staff must obtain a work permit sponsored by a licensed UAE employer before entry, followed by a residence visa valid for 2 years renewable. Applicants require a valid passport, medical fitness certificate from a MOHRE-approved centre, and Emirates ID application within 60 days of arrival. The permit costs AED 300 for issuance in 2026.
What education and experience criteria are required for cleaning staff jobs in the United Arab Emirates?
As per the Ministry of Human Resources and Emiratisation, cleaning staff positions require no formal education beyond basic literacy but mandate at least 6 months of documented prior experience in cleaning services. Applicants must be aged 18 to 60 years and pass a medical test confirming fitness for physical work. Experience certificates must be attested by the UAE embassy in the home country.
What documents and steps are needed to apply for cleaning staff jobs in the United Arab Emirates in 2026?
As per the Ministry of Human Resources and Emiratisation, applicants must submit a passport copy, recent photograph, attested experience certificate, and educational documents through the MOHRE online portal or a Tadbeer centre. The employer files the work permit application first, after which the candidate completes biometrics and medical screening within 30 days. All submissions require payment of AED 150 for the permit processing fee.
