Welder/Fitter
Company
Trion Technical Oilfield Services LLC
Location
Abu Dhabi
Job Type
Full-time
Posted
6 days ago
Via
Glassdoor
Apply On
Job Description
Welder / Fitter – Roles & Responsibilities
1. Drawing Interpretation
• Read and understand fabrication drawings, shop drawings, and instructions
• Identify dimensions, tolerances, and welding details
2. Marking & Fit-Up
• Perform marking, cutting, and edge preparation of materials
• Align and fit components (plates, pipes, structures) as per drawings
• Ensure proper gap, level, and alignment before welding
3. Welding Activities
• Carry out welding (ARC, MIG, TIG as required)
• Follow WPS (Welding Procedure Specification) when applicable
• Ensure strong, defect-free welds with proper penetration
4. Grinding & Finishing
• Perform grinding, chipping, and surface finishing
• Remove slag, spatter, and sharp edges
5. Inspection & Quality Control
• Check fit-up and welding quality against drawings/specifications
• Rectify defects such as misalignment, cracks, or incomplete welds
6. Equipment Handling
• Operate welding machines, gas cutting sets, grinders, and hand tools
• Ensure proper handling and storage of electrodes and consumables
7. Maintenance of Tools
• Maintain tools and welding equipment in good working condition
• Report any faults or damages to supervisor
8. Safety Compliance
• Follow safety procedures and use PPE (helmet, gloves, goggles, etc.)
• Ensure safe handling of gas cylinders and electrical equipment
9. Site Work (if applicable)
• Assist in installation and erection at site
• Ensure proper alignment and fixing during installation
10. Team Coordination
• Work closely with fabricators, supervisors, and engineers
• Report progress, issues, and material requirements
Job Type: Full-time
Pay: From AED1,500.00 per month
Work Location: In person
1. Drawing Interpretation
• Read and understand fabrication drawings, shop drawings, and instructions
• Identify dimensions, tolerances, and welding details
2. Marking & Fit-Up
• Perform marking, cutting, and edge preparation of materials
• Align and fit components (plates, pipes, structures) as per drawings
• Ensure proper gap, level, and alignment before welding
3. Welding Activities
• Carry out welding (ARC, MIG, TIG as required)
• Follow WPS (Welding Procedure Specification) when applicable
• Ensure strong, defect-free welds with proper penetration
4. Grinding & Finishing
• Perform grinding, chipping, and surface finishing
• Remove slag, spatter, and sharp edges
5. Inspection & Quality Control
• Check fit-up and welding quality against drawings/specifications
• Rectify defects such as misalignment, cracks, or incomplete welds
6. Equipment Handling
• Operate welding machines, gas cutting sets, grinders, and hand tools
• Ensure proper handling and storage of electrodes and consumables
7. Maintenance of Tools
• Maintain tools and welding equipment in good working condition
• Report any faults or damages to supervisor
8. Safety Compliance
• Follow safety procedures and use PPE (helmet, gloves, goggles, etc.)
• Ensure safe handling of gas cylinders and electrical equipment
9. Site Work (if applicable)
• Assist in installation and erection at site
• Ensure proper alignment and fixing during installation
10. Team Coordination
• Work closely with fabricators, supervisors, and engineers
• Report progress, issues, and material requirements
Job Type: Full-time
Pay: From AED1,500.00 per month
Work Location: In person
Frequently Asked Questions
Quick answers about Carpenter Jobs
What is the minimum monthly salary for carpenter jobs in the UAE in 2026?
As per the Ministry of Human Resources and Emiratisation, the minimum salary for carpenters holding skilled work permits in the UAE is AED 4,000 per month as of 1 January 2026, with overtime paid at 1.25 times the hourly rate after 8 hours daily. Employers must deposit this amount into a UAE bank account registered with the Wages Protection System.
What visa and work permit requirements apply for foreign carpenters seeking jobs in the UAE in 2026?
Foreign carpenters must obtain a work permit and residence visa through the Ministry of Human Resources and Emiratisation before starting employment, with the permit valid for 2 years and renewable. The employer sponsors the visa, and applicants require a valid passport, medical fitness certificate from an approved UAE center, and Emirates ID application within 60 days of arrival.
What education and experience are required to qualify for carpenter jobs in the UAE?
Carpenters need at least 2 years of verified experience in the trade plus a secondary school certificate or equivalent vocational training certificate recognized by the Ministry of Human Resources and Emiratisation as of 2026. No university degree is mandatory, but a trade test certificate from a government-approved institute increases approval chances for the work permit.
What documents are needed to apply for a carpenter position and work permit in the UAE?
Applicants must submit a passport copy valid for at least 6 months, 4 passport-size photos, educational and experience certificates attested by the UAE embassy in the home country, and a contract signed by the employer registered with the Ministry of Human Resources and Emiratisation by 2026. The full application is processed online via the MOHRE portal within 5 working days.
